Laserfiche WebLink
D . Schedule : Provide a schedule of stainless-steel, hollow-metal work prepared by or under the supervision <br /> of supplier, using same reference numbers for details and openings as those on Drawings . Coordinate <br /> with a door hardware schedule . <br /> 1 .4 QUALITY ASSURANCE <br /> A. Source Limitations : Obtain stainless-steel, hollow-metal work from single source from single <br /> manufacturer. <br /> 1 . 5 DELIVERY, STORAGE, AND HANDLING <br /> A. Deliver doors and frames palletized, wrapped, or crated to provide protection during transit and Project- <br /> site storage. Do not use nonvented plastic . <br /> B . Store doors and frames under cover at Project site. Place units in a vertical position with heads up, <br /> spaced by blocking, on minimum 4-inch- ( 100-mm-) high wood blocking. Avoid using nonvented plastic <br /> or canvas shelters that could create a humidity chamber. <br /> 1 . If wrappers on doors become wet, remove cartons immediately. Provide m;nimum 1 /4-inch (6- <br /> mm) space between each stacked door to permit air circulation. <br /> 1 . 6 PROJECT CONDITIONS <br /> A. Field Measurements : Verify actual dimensions of openings by field measurements before fabrication. <br /> 1 .7 COORDINATION <br /> A. Coordinate installation of anchorages for stainless-steel frames . Furnish setting drawings, templates, and <br /> directions for installing anchorages, including sleeves, inserts, anchor bolts, and items with integral <br /> anchors. Deliver such items to Project site in time for installation. <br /> L <br /> PART2 - PRODUCTS <br /> 2 . 1 STAINLESS-STEEL DOORS AND FRAMES <br /> A. Manufacturers : Subject to compliance with requirements, available manufacturers offering products that <br /> may be incorporated into the Work include, but are not limited to, the following: <br /> 1 . Ceco Door Products ; an ASSA ABLOY Group company. <br /> 2 . CURRIES Company; an ASSA ABLOY Group company. <br /> 3 . Steelcraft; an Ingersoll-Rand company. <br /> 2 .2 STAINLESS -STEEL DOORS <br /> A. Description: Stainless-steel doors, not less than 1 -3/4 inches (44 mm) thick, of seamless, hollow-metal <br /> construction. Construct doors with smooth, flush surfaces without visible joints or seams on faces. <br /> Wabasso Beach Park 08130 - 2 <br /> Indian River County <br /> DAA Project No . 6008 <br /> L <br />