Laserfiche WebLink
1 . Face Sheets : Fabricate from 0 . 062-inch- ( 1 . 59-mm-) thick, stainless-steel sheet. <br /> 2 . Core Construction: Fabricate doors with core indicated. <br /> a. Laminated Core : fastened to face sheets with waterproof adhesive . <br /> 3 . Hardware Reinforcement: Fabricate according to ANSI/NAAMM-HMMA 866 with reinforcing <br /> plates from stainless steel. <br /> B . Performance : Level A, ANSI A250 .4 . <br /> C . Materials : <br /> 1 . Stainless-Steel Sheet: ASTM A 240/A 240M, austenitic stainless steel, Type 316 . <br /> D . Stainless-Steel Finishes : <br /> 1 . Surface Preparation: Remove tool and die marks and stretch lines, or blend into finish. <br /> 2 . Polished Finishes : Grind and polish surfaces to produce uniform finish, free of cross scratches. <br /> a. Dull Satin Finish: No. 6 . <br /> 3 . Factory primed for field finish. <br /> 2 . 3 STAINLESS-STEEL FRAMES <br /> A. Description: Fabricate stainless-steel frames of construction indicated, with faces of corners mitered and <br /> contact edges closed tight. <br /> 1 . Door Frames : Machine mitered and full welded. <br /> a. Weld frames according to HMMA 820 . <br /> 2 , Door Frames for Openings 48 Inches ( 1219 mm) Wide or Less : Fabricate from 0 .062-inch- ( 1 . 59- <br /> mm-) thick, stainless-steel sheet. <br /> 3 . Door Frames for Openings More Than 48 Inches ( 1219 mm) Wide : Fabricate from 0 .078-inch- <br /> ( 1 .98-mm-) thick, stainless-steel sheet. <br /> 4 . Hardware Reinforcement: Fabricate according to ANSI/NAAMM-HMMA 866 with reinforcing <br /> plates from stainless steel. <br /> 5 Jamb Anchors : <br /> a. Masonry Type : Adjustable strap-and-stirrup or T-shaped anchors to suit frame size, not <br /> less than 0 .062-inch- ( 1 . 59-mm-) thick stainless steel with corrugated or perforated straps <br /> not less than 2 inches (50 mm) wide by 10 inches (250 mm) long; or wire anchors not less <br /> than 0 . 156 inch (4 .0 mm) thick. <br /> 6. Floor Anchors : Not less than 0 .078 inch- ( 1 . 98-mm-) thick stainless steel, and as follows: <br /> a. Monolithic Concrete Slabs : Clip-type anchors, with two holes to receive fasteners . <br /> B . Performance : Level A, ANSI A250 .4 . <br /> Wabasso Beach Park 08130 - 3 <br /> Indian River County <br /> DAA Project No. 6008 <br />