2/21/1968 - Laserfiche WebLink

Home Browse Search

and when he shall be notified that the corrections have been made, he shall again inspect the work or apparatus without further charge; but, when extra inspection trips are necessary, due to any one of the following reasons, a charge of $3. 00 shall be made for each trip: (a) wrong address; (b) condemned work, resulting from faulty construc- tion; (c) repairs or corrections not made when inspection is called; (d) work not ready for inspection when called. The payment of re -inspection fee'shall be made before any further permits will be issued to the person owing same: WORK STARTED BEFORE PERMIT IS ISSUED - THE FEE SHALL BE DOUBLED. Section 22. INSPECTIONS. (1) All new electrical work, and such portions of existing installations as may be affected by new work or any changes, shall be inspected to insure compliance with all the requirements of this code and to assure that the installation and construction of the elec- trical system is in accordance with approved plans. (2) All piping or tubing to be concealed, shall be in place; all junctions shall be soldered and left untaped, .or approved mechanical connectors may be used. If due to structural conditions,panels can- not be set, such adapters shall be in place before meters are installed or system otherwise energized. No such wiring or installation shall be considered ready for inspection until completed as outlined above. (3) When the electrical work in any building for which a per- mit has been obtained, is ready for inspection, it shall be the duty of the person in charge of work to give notice in writing on forms fur- . nished at the office of the Building Official, stating .the location of the work, name of the owner, name of the person in charge of the work and the name of the person doing the work. (4) It shall be unlawful to lathe, seal or in any manner conceal any electrical wiring or equipment until same has been inspected and 20 FEB 2 1196$ BOOK 1.1 PACE126