Laserfiche WebLink
information to be shown on the drawings shall be in conformance with generally accepted <br /> standards of the engineering and construction industry . Drawings shall be prepared using <br /> AutoCAD 2005 . <br /> Driven Pile System Design <br /> Based on the driven pile system analysis performed in subtask above, CDM will provide <br /> engineering services and coordination for the civil and structural design of the driven pile <br /> system. CDM will subcontract the structural design services of the driven pile and retaining <br /> wall system to John H . Dean Architect & Associates . The driven pile system will be designed to <br /> provide structural support to the retaining wall system without excavating, dewatering, and <br /> transporting the old debris that exists at the site, which would add considerable cost to the <br /> earthwork portion of the project. In addition, the environmental concerns associated with <br /> excavating, dewatering, and transporting the debris will not allow for the removal of these <br /> deleterious materials . <br /> Office / Household Hazardous Waste Building Design and Security Camera System Design <br /> IRC SWDD has requested that CDM combine the office and restroom buildings, along with the <br /> household hazardous waste storage, into one building structure with roof overhangs to provide <br /> weather protection for the employees and customers . This will require additional design that <br /> was not included in the original Scope of Services . In addition, IRC SWDD has requested that <br /> CDM provide a security camera system to monitor daily activities at the proposed Oslo <br /> Convenience Center . CDM will prepare the design drawings and specifications for a single <br /> building structure for the office / restroom and household. hazardous waste storage and include <br /> a security camera system. This amendment includes services associated with the additional <br /> design for the canopy / roofing system and security camera system. <br /> Free Standing Entry Sign <br /> IRC SWDD has requested that CDM include design of a free standing entry sign that is <br /> proposed to be constructed at the entry of the Oslo Convenience Center on Old Dixie Highway . <br /> CDM will subcontract the design services for the sign to John H . Dean Architect & Associates . <br /> This amendment includes services associated with design of the free standing entry sign . It is <br /> asstnned that no additional permitting will be required . Additional budget may be necessary if <br /> any permitting services associated with the sign are required . <br /> Overflow / Storage Area and Trailer Entrance Road <br /> IRC SWDD has requested that the existing Oslo Convenience Center be demolished and used as <br /> an overflow and storage area . The existing site will be cleared and regarded to accommodate <br /> storage of extra vehicles, transfer trailers, and materials . This will require additional site civil <br /> engineering and landscape design . CDM will provide additional drainage and civil engineering <br /> design for the overflow and storage area . CDM will subcontract the landscape design services <br /> to John H . Dean Architect & Associates . <br /> IRC SWDD has requested that the designed location of the western employee / trailer entrance <br /> road be adjusted to separate it from the resident entrance . The designed location of the lift <br /> station will also need to be adjusted . This amendment includes engineering design services <br /> A-3 j12572.doc <br />