2013-214 - Laserfiche WebLink

Home Browse Search

(d) Enter the maximum number of employees present at the facility at any given time in the Number of Employees on Site field of the ID Codes tab . (a minimum of one is required for unmanned facilities) (e) Enter the Facility phone number in the Facility Phones tab field . (f) Enter the name , title and 24 -hour phone number of the designated facility emergency coordinator in the Contacts tab field . (g) Enter the main route (s) used to transport chemicals to the facility (from the County line to the facility) in the notes tab of the Facility Page . (h) Enter the route(s) used to exit the Vulnerable Zone (s) in the notes tab of the Facility Page . (i ) Enter any past releases that have occurred in the last five years at the facility in the notes tab of the Facility Page . Include date, time, chemical name/quantity and number of persons injured or deaths (this information is available from the facility) . If it is determined that a facility does not have a historical accident record, that shall be noted . 2 . Hazard Identification (CAMEOfm Chemical in Inventory Page) (a) For each Extremely Hazardous Substance present over the Threshold Planning Quantity (TPQ), create a Chemical in Inventory page ( if a Chemical in Inventory page hasn ' t been created already) and enter the proper chemical name and Chemical Abstract Service (CAS ) number. (b) On each Chemical in Inventory page created for each Extremely Hazardous Substance present over the TPQ, enter in pounds (not range codes) the maximum quantity of each Extremely Hazardous Substance in the Max Daily Amount field of the Physical State and Quantity tab . (c) Enter the amount ( in pounds) of each Extremely Hazardous Substance stored in the largest container or interconnected containers in the Max amount in largest container field of the Physical State and Quantity tab (this is the release amount used to determine the Vulnerable Zone) . (d) Choose the appropriate code from the drop down list for the Type of storage container (drum , cylinder, tank etc . ) , storage pressure (ambient, greater than ambient etc . ) and storage temperature (ambient, greater than ambient etc .) of each Extremely Hazardous Substance in those fields on the Location tab . (e) For each Extremely Hazardous Substance over TPQ, On the Physical State & Quantity tab check the appropriate boxes in the Physical State, Hazards and Health Effects fields ( information on the above may be found by clicking on the Datasheet button which opens the CAMEO Chemicals database .