2010-111 - Laserfiche WebLink

Home Browse Search

FFF ., ,,� , 3$5 '€,� . �."r # ` k asps .„i . „�a - s ;5,., x, > , ' ' a a �s � 7. , ” r: + x ' " y a IF • 5 . Moving parts shall be rotated a minimum of once weekly to insure proper lubrication and to avoid metal -to- metal " welding " . Upon installation of the equipment, start the equipment, at least half load, once weekly for an adequate period of time to ensure that the equipment does not deteriorate from lack of use . 6 . Lubricants shall be changed upon completion of installation and as frequently as required thereafter during the period between installation and acceptance . Mechanical equipment to be used in the work, if stored for longer than ninety days , shall have the bearings cleaned, flushed and lubricated prior to testing and startup, at no additional cost to the Owner . 7 . Prior to acceptance of the equipment, have the manufacturer inspect the equipment and certify that its condition has not been detrimentally affected by the long storage period. Such certifications by the manufacturer shall be deemed to mean that the equipment is judged by the manufacturer to be in a condition equal to that of equipment that has been shipped, installed, tested and accepted in a minimum time period . As such , the manufacturer will guarantee the equipment equally in both instances . If such a certification is not given, the equipment shall be judged to be defective . It shall be removed and replaced at the Contractor' s expense . 1 . 09 WARRANTY A . For all major pieces of equipment, submit a warranty from the equipment manufacturer as specified in Section 01740 . 1 . 10 SPARE PARTS A . Spare parts for certain equipment provided under Divisions 11 , 15 and 16 have been specified in the pertinent Sections . Collect and store all spare parts as required by the manufacturer in accordance with Paragraph 1 . 08 above . In addition , furnish to the Engineer an inventory listing all spare parts, the equipment they are associated with , the name and address of the supplier and the delivered cost of each item . Copies of actual invoices for each item shall be furnished with the inventory to substantiate the delivered cost . Deliver the spare parts to the Owner not later than 10 days prior to plant start-up . 1 . 11 GREASE , OIL AND FUEL A . Allgrease, oil and fuel required for testing of equipment shall be furnished with the i respective equipment . The Owner shall be furnished with a year' s supply of required lubricants including grease and oil of the type recommended by the manufacturer with each item of equipment supplied under Divisions 11 , 15 and 16 . B . The Contractor shall be responsible for changing the oil in all drives and intermediate It drives of each mechanical equipment after initial break- in of the equipment, which in no event shall be any longer than three weeks of operation . PART 2 — PRODUCTS (NOT USED) PART 3 — EXECUTION (NOT USED) • END OF SECTION 01610 - 5