Laserfiche WebLink
ORDINANCE NO. 2000- 015 <br />b. The appropriate filing fee established by the board of county <br />commissioners; <br />c. Ten (10) sets of the plat drawings and a written <br />response to each item in the project's pre -application conference <br />discrepancy letter or a written description of all revisions made to the <br />project plans since the pre -application conference review; <br />3. Preliminary Plat Resubmittal (post -TRC): <br />e. The applicant shall respond, in writing, to each comment following receipt of the <br />discrepancy letter and submit five (5) sets of a revised preliminary <br />plat if deemed necessary by the community development staff with a written response <br />to each item in the project's TRC discrepancy letter and a written request to be placed <br />on the planning and zoning commission's agenda for approval. <br />4. Final Plat Initial (pre -TRC) Submittal: <br />LDR SUBDIVISION Chapter Section 913.07(6)(B)6 is hereby amended to read as follows: <br />final <br />drawing <br />LDR <br />information <br />SITE <br />SUBDIVISION <br />Seven ( Ten (10) <br />copies of the <br />plat showing <br />required <br />Chapter <br />and <br />Chapter <br />Section <br />913.07(4)(F)I.e. <br />is <br />hereby <br />is hereby <br />follows: <br />follows: <br />LDR <br />amended <br />amended <br />as <br />e. The applicant shall respond, in writing, to each comment following receipt of the <br />discrepancy letter and submit five (5) sets of a revised preliminary <br />plat if deemed necessary by the community development staff with a written response <br />to each item in the project's TRC discrepancy letter and a written request to be placed <br />on the planning and zoning commission's agenda for approval. <br />4. Final Plat Initial (pre -TRC) Submittal: <br />LDR SUBDIVISION Chapter Section 913.07(6)(B)6 is hereby amended to read as follows: <br />Staff Note: There is no need to change the final plat drawing set requirement for final plat <br />resubmittals (post -TRC) because the final plat review procedures merely reference the preliminary <br />plat section 913.07(4)(F) that is being amended under #3, above. Thus, the #3 amendment will <br />reduce final plat drawing sets from 7 to 5. <br />5. Site Plan Pre -application Conference Submittal: <br />final <br />drawing <br />LDR <br />information <br />SITE <br />6. <br />Seven ( Ten (10) <br />copies of the <br />plat showing <br />required <br />Chapter <br />and <br />914.06(2)(d)2. <br />is <br />hereby <br />follows: <br />certifications. <br />amended <br />as <br />Staff Note: There is no need to change the final plat drawing set requirement for final plat <br />resubmittals (post -TRC) because the final plat review procedures merely reference the preliminary <br />plat section 913.07(4)(F) that is being amended under #3, above. Thus, the #3 amendment will <br />reduce final plat drawing sets from 7 to 5. <br />5. Site Plan Pre -application Conference Submittal: <br />(d) Submittal requirements. The following shall be provided by the applicant, in the <br />appropriate written or graphic form: <br />1. A complete application; <br />2. Ten (10) plan sets (twenty-four (24) inches by thirty- <br />six (36) inches) depicting: <br />Coding: Words in strikenthrotigh type are deletions from existing law. Words underlined are <br />additions. u\d\ordinance\planset school setback.ord2 <br />LDR <br />SITE <br />PLAN <br />Chapter <br />Section <br />914.06(2)(d)2. <br />is <br />hereby <br />follows: <br />amended <br />as <br />(d) Submittal requirements. The following shall be provided by the applicant, in the <br />appropriate written or graphic form: <br />1. A complete application; <br />2. Ten (10) plan sets (twenty-four (24) inches by thirty- <br />six (36) inches) depicting: <br />Coding: Words in strikenthrotigh type are deletions from existing law. Words underlined are <br />additions. u\d\ordinance\planset school setback.ord2 <br />