Laserfiche WebLink
2. Contractor shall remedy the deficiencies in the work, and shall send a <br />second written notice of substantial completion to Engineer <br />3. Engineer will re -inspect the work <br />D. When Engineer concurs that the work is substantially complete, he will: <br />1. Prepare a Certificate of Substantial Completion, accompanied by a list of <br />items to be completed or corrected <br />2. Submit the Certificate to Owner and Contractor for their written <br />acceptance of the responsibilities assigned to them in the certificate. <br />1.03 FINAL INSPECTION <br />A. When Contractor considers the work is complete, he shall submit written <br />certification that: <br />1. Contract Documents have been reviewed <br />2- Work has been inspected for compliance with Contract Documents <br />3. Work has been completed in accordance with Contract Documents <br />4. Equipment and systems have been tested in the presence of the <br />Owner's representative and are operational <br />5. Equipment and systems instructions to Owner's personnel have been <br />completed in accordance with Section 01730 <br />6. Work is completed and ready for final inspection <br />B. Engineer will make an inspection to verify the status of completion with <br />reasonable promptness after receipt of such certification. <br />C. Should Engineer consider that the work is incomplete or defective: <br />1. Engineer will promptly notify the Contractor, in writing, listing the <br />incomplete or defective work. <br />2. Contractor shall take immediate steps to remedy the stated <br />deficiencies, and send a second written certification to Engineer that <br />the work is complete. <br />3. Engineer will re -inspect the work <br />D. When Engineer finds that the work is acceptable under the Contract <br />Documents, he shall request the Contractor to make closeout submittals. <br />1.04 RE -INSPECTION FEES <br />Should the Engineer perform re -inspection due to failure of the work to comply with the <br />claims of status of completion made by the Contractor, Contractor will compensate <br />Engineer/Owner for such additional services. <br />w• <br />01700 Contract Close-out.doc R <br />01700-2 <br />