|
SECTION 01025
<br />MEASUREMENT AND PAYMENT
<br />GENERAL
<br />1.01 GENERAL
<br />The unit price bid for furnishing and installation/construction of mains shall include, but is
<br />not limited to, compliance with Contract Requirements (Division 0) & General Requirements
<br />(Division 1), utilities exploration, coordination with any permitting agencies, audio visual
<br />documentation, trenching, removing, disposing of and replacing unsuitable (i.e., plastic or
<br />organic) material, dewatering, installation of pipe and all appurtenances, trace wires,
<br />sleeves, restrainers, filling trench, soil compaction, disinfection, flushing, testing, irrigation
<br />repair, removal, disposition and replacement of surface over trench to pre -construction
<br />conditions, restoration of any pavement or sid—valk darnaged or destroyed, traffic
<br />maintenance/control, demobilization, Trench Safety Act Compliance, Payment Bond and
<br />Performance Bond, and construction staking, All materials and installation shall be per
<br />FDOT and Indian River County Utility Standards and Specifications as applicable unless
<br />otherwise noted in the bid documents. Contractor will be provided with a copy of
<br />construction plans in AutoCAD format. which includes location reference to State Plane
<br />Coordinates to use in Project Record Documents.
<br />1.02 EQUIPMENT AND MATERIALS IN STORAGE
<br />Partial payment for materials and equipment in proper storage at the site of the work or
<br />other approved storage site will be made for those items for which the Contractor has
<br />submitted paid invoices to the Engineer. The partial payment for stored materials will be
<br />50% of the value of materials and equipment, based on receipted bills, furnished but not
<br />incorporated in the work, as determined by Engineer.
<br />1.03 MEASUREMENT
<br />A Reuse Main Adjustments: Measurement of reuse main adjustments shall be computed
<br />as a lump sum item and shalt include the furnishing and installation of all mains.
<br />fittings, restraints, testing, and restoration.
<br />B. Existing Reuse Main Adjustment "Cut & Remove": Measurement of the physical
<br />removal of existing reuse main shall be computed as a lump sum item and shall
<br />include all work described under Section 02030,
<br />C Mains (i.e. Pipe): Measurement of mains (or ,pipe) shall be computed using linear feet
<br />(t -I-), as measured along the centerline of the pipe installed (except when included in
<br />lump sum bid items -d i.e. Aerial crossing). No deduction will be made for the length of
<br />valves and fittings installed in the line. Where the measurement terminates at a valve,
<br />bend, tee, or other fitting, the centerline of the valve or fitting shall be the point of
<br />termination. The unit price bid for furnishing and installation/construction of reuse
<br />mains shall include, but is not limited to, utilities exploration, coordination with any
<br />permitting agencies, clearing, trenching, removing, disposing of and replacing
<br />unsuitable (i.e., plastic or organic) material, excavation, dewatering, installation of pipe
<br />and all appurtenances, trace wires, sleeves, encasement material, restrainers, all
<br />mechanical joint fittings and thrust blocks, all required erosion control, filling trench, soil
<br />compaction, backfill, grading, disinfection, flushing, testing, irrigation repair. removal,
<br />disposition and replacement of surface over trench to pre-corstruction conditions,
<br />restoration of any sidewalk damaged or destroyed. traffic maintenance/control
<br />demobilization, 'Drench Safety Act Compliance, Payment Bond and Perfo mance Bond
<br />01025 1
<br />i> Vv;5%(-AA '%`),Wto Vita..'we-r,rrt pad pd r vni doE
<br />
|