Laserfiche WebLink
5. Submittals for equipment specified under Divisions 11 and 13 shall include a listing <br />of all installations where identical or similar equipment has been installed and been <br />in operation for a period of at least one year. <br />B. Product Data <br />Product data as specified in individual Sections include, standard prepared data for <br />manufactured products (sornetimes referred to as catalog data), such as the <br />manufacturer's product specification and installation instructions, availability of colors <br />and patterns, manufacturer's printed statements of compliances and applicability, <br />roughing -in diagrams and templates, catalog cuts, product photographs, standard <br />wiring diagrams, printed performance curves and operational -range diagrams, <br />production or quality control inspection and test reports and certifications, mill <br />reports, product operating and maintenance instructions and recommended spare - <br />parts listing and printed product warranties, a,, applicable to the work. <br />C. Samples <br />1. Samples specified in individuai Sections include, physical examples of the work such <br />as sections of manufactured or fabricated work, small cuts or containers of materials, <br />complete units of repetitively -used products, color/texture/pattern swatches and <br />range sets, specimens for coordination of visual effect, graphic symbols and units of <br />work to be used by the Engineer or Owner for independent inspection and testing, as <br />applicable to the work. <br />2. The Contractor shall prepare a transmittal letter in triplicate for each shipment of <br />samples. Contractor shall enclose a copy of this letter with the shipment and send a <br />copy of this letter to the Engineer. Approval of a sample shall be only for the <br />characteristics or use named in such approval and shall not be construed to change <br />or modify any Contract Requirements. <br />1.03 CONTRACTOR'S RESPONSIBILITIES <br />A. Review shop drawings, product data and samples, including those by subcontractors, <br />prior to submission to determine and verify the following: <br />1. Field measurements <br />2. Field construction criteria <br />3. Catalog numbers and similar data <br />4. Conformance with related Sections <br />B. Each shop drawing, sample and product data submitted by the Contractor shall have <br />affixed to it the following Certification Statement including the Contractor's Company name <br />and signed by the Contractor: "Certification Statement: by this submittal, I hereby <br />represent that I have determined and verified all field measurements, field construction <br />criteria, materials, dimensions, catalog numbers and similar data and I have checked and <br />coordinated each iteral with other applicable approved shop drawings and all Contract <br />requirements." Shop drawings and product data sheets 11 -inch by 17 -inch and smaller <br />shall be bound together in an orderly fashion and bear the above Certification Statement <br />on the cover sheet. The cover sheet shall fully describe the packaged data and include a <br />listing of all items within the package. Provide to the Resident Project Representative a <br />copy of each transmittal sheet for shop drawings, product data and samples at the time of <br />submittal to the Engineer. <br />C. Notify the Engineer in writing, at the time of submittal, of any deviations in the submittals <br />from the requirements of the Contract Documents. <br />01300-2 <br />DADIVISION 1101300 Submittals doc <br />