Laserfiche WebLink
INDIAN RIVER COUNTY JULY 25, 2014 <br />INTERGENERATIONAL RECREATION CENTER 100% CONSTRUCTION DOCUMENTS <br />5. Shop primers. <br />1.6 QUALITY ASSURANCE <br />A. Fabricator Qualifications: A qualified fabricator that participates in the AISC Quality Certification <br />Program and is designated an AISC-Certified Plant, Category STD. <br />B. Installer Qualifications: A qualified installer who participates in the AISC Quality Certification <br />Program and is designated an AISC-Certified Erector, Category ACSE. <br />C. Shop -Painting Applicators: Qualified according to AISC's Sophisticated Paint Endorsement P3 <br />or SSPC-QP 3, "Standard Procedure for Evaluating Qualifications of Shop Painting <br />Applicators." <br />Welding Qualifications: Qualify procedures and personnel according to AWS D1.1/D1.1M, <br />"Structural Welding Code - Steel." <br />Welders and welding operators performing work on bottom -flange, demand -critical welds <br />shall pass the supplemental welder qualification testing, as required by AWS D1.8. <br />FCAW-S and FCAW-G shall be considered separate processes for welding personnel <br />qualification. <br />E. Comply with applicable provisions of the following specifications and documents: <br />1. AISC 303. <br />2. AISC 341 and AISC 341s1. <br />3. AISC 360. <br />4. RCSC's "Specification for Structural Joints Using ASTM A 325 or A 490 Bolts." <br />F. Preinstallation Conference: Conduct conference at Project site. <br />1.7 DELIVERY, STORAGE, AND HANDLING <br />A. Store materials to permit easy access for inspection and identification. Keep steel members off <br />ground and spaced by using pallets, dunnage, or other supports and spacers. Protect steel <br />members and packaged materials from corrosion and deterioration. <br />1. Do not store materials on structure in a manner that might cause distortion, damage, or <br />overload to members or supporting structures. Repair or replace damaged materials or <br />structures as directed. <br />B. Store fasteners in a protected place in sealed containers with manufacturer's labels intact. <br />1. Fasteners may be repackaged provided Owner's testing and inspecting agency observes <br />repackaging and seals containers. <br />2. Clean and relubricate bolts and nuts that become dry or rusty before use. <br />3. Comply with manufacturers' written recommendations for cleaning and lubricating <br />ASTM F 1852 fasteners and for retesting fasteners after lubrication. <br />STRUCTURAL STEEL FRAMING 051200-3 <br />