Laserfiche WebLink
INDIAN RIVER COUNTY JULY 25, 2014 <br />INTERGENERATIONAL RECREATION CENTER 100% CONSTRUCTION DOCUMENTS <br />1.8 COORDINATION <br />A. Coordinate selection of shop primers with topcoats to be applied over them. Comply with paint <br />and coating manufacturers' recommendations to ensure that shop primers and topcoats are <br />compatible with one another. <br />B. Coordinate installation of anchorage items to be embedded in or attached to other construction <br />without delaying the Work. Provide setting diagrams, sheet metal templates, instructions, and <br />directions for installation. <br />PART 2 - PRODUCTS <br />2.1 STRUCTURAL -STEEL MATERIALS <br />A. W -Shapes: As indicated on drawings. <br />B. Channels, Angles, M, S -Shapes: As indicated on drawings. <br />C. Cold -Formed Hollow Structural Sections: ASTM A 500, Grade B, structural tubing. <br />2.2 BOLTS, CONNECTORS, AND ANCHORS <br />A. High -Strength Bolts, Nuts, and Washers: ASTM A 325, Type 1, heavy -hex steel structural bolts; <br />ASTM A 563, Grade C, heavy -hex carbon -steel nuts; and ASTM F 436, Type 1, hardened <br />carbon -steel washers; all with plain finish. <br />1. Direct -Tension Indicators: ASTM F 959, Type 325, compressible -washer type with plain <br />finish. <br />B. High -Strength Bolts, Nuts, and Washers: ASTM A 490, Type 1, heavy -hex steel structural <br />bolts or tension -control, bolt -nut -washer assemblies with splined ends; ASTM A 563, Grade DH, <br />heavy -hex carbon -steel nuts; and ASTM F 436, Type 1, hardened carbon -steel washers with <br />plain finish. <br />Direct -Tension Indicators: ASTM F 959, Type 490, compressible -washer type with plain <br />finish. <br />C. Tension -Control, High -Strength Bolt -Nut -Washer Assemblies: ASTM F 1852, Type 1, heavy - <br />hex head assemblies consisting of steel structural bolts with splined ends, heavy -hex carbon - <br />steel nuts, and hardened carbon -steel washers. <br />1. Finish: Mechanically deposited zinc coating. <br />Shear Connectors: ASTM A 108, Grades 1015 through 1020, headed -stud type, cold -finished <br />carbon steel; AWS D1.1/D1.1M, Type B. <br />E. Headed Anchor Rods: As indicated on drawings.. <br />1. Nuts: ASTM A 563 heavy -hex carbon steel. <br />2. Plate Washers: ASTM A 36/A 36M carbon steel. <br />3. Washers: ASTM F 436, Type 1, hardened carbon steel. <br />4. Finish: Mechanically deposited zinc coating, ASTM B 695, Class 50. <br />STRUCTURAL STEEL FRAMING 051200 - 4 <br />