Laserfiche WebLink
INDIAN RIVER COUNTY JULY 25, 2014 <br />INTERGENERATIONAL RECREATION CENTER 100% CONSTRUCTION DOCUMENTS <br />1.7 DELIVERY, STORAGE & HANDLING <br />A. Comply with Division 01 Product Requirements Sections. <br />B. Storage and Protection: Store materials protected from exposure to harmful weather <br />conditions, at temperature and humidity conditions recommended by manufacturer. <br />1.8 PROJECT CONDITIONS <br />A. Field Measurements: Verify actual measurements/openings by field measurements before <br />fabrication; show recorded measurements on shop drawings. Coordinate field measurements <br />and fabrication schedule with construction progress to avoid construction delays. <br />B. Adhesive: For best results, do not apply adhesives at temperatures below 65°F. <br />PART 2- PRODUCTS <br />2.1 MANUFACTURER <br />A. As indicated on finish material list. <br />2.2 STANDARD DECORATIVE LAMINATES <br />A. Acceptable Alternate Manufacturers: Formica, Pionite <br />B. Decorative surface papers, impregnated with melamine resins, bonded under heat and pressure <br />to kraft papers impregnated with phenolic resins. <br />C. General Purpose Type: Wilsonart Type 107, having the following physical characteristics: <br />1. Sheet thickness: 0.048 inch nominal (1.22mm). <br />2. Exceeding performance requirements of NEMA LD 3 current revision, Grade HGS. <br />3. Surface burning characteristics in accordance with ASTM E 84; unbonded. <br />4. Patterns and Finishes: Indicated on drawings in Finish Material List <br />D. Vertical Surface Type: Wilsonart Type 335, having the following physical characteristics: <br />1. Sheet thickness: 0.028 inch nominal (0.71 mm). <br />2. Exceeding performance requirements of NEMA LD 3 current revision, Grade VGS and <br />VGP. <br />3. Surface burning characteristics in accordance with ASTM E 84; unbonded. <br />4. Patterns and Finishes: Indicated on drawings. <br />E. Postforming Type: Wilsonart Type 350, having the following physical characteristics: <br />1. Sheet thickness: 0.039 inch nominal (1.00 mm). <br />2. Exceeding performance requirements of NEMA LD 3 current revision, Grade HGP. <br />3. Surface burning characteristics in accordance with ASTM E 84; unbonded. <br />4. Patterns and Finishes: Indicated on drawings. <br />DECORATIVE PLASTIC LAMINATE 060620-3 <br />