Laserfiche WebLink
INDIAN RIVER COUNTY JULY 25, 2014 <br />INTERGENERATIONAL RECREATION CENTER 100% CONSTRUCTION DOCUMENTS <br />Requirements of authorities having jurisdiction shall supersede requirements for <br />specialists. <br />G. Testing Agency Qualifications: An NRTL, an NVLAP, or an independent agency with the <br />experience and capability to conduct testing and inspecting indicated, as documented according <br />to ASTM E 329; and with additional qualifications specified in individual Sections; and, where <br />required by authorities having jurisdiction, that is acceptable to authorities. <br />1. NRTL: A nationally recognized testing laboratory according to 29 CFR 1910.7. <br />2. NVLAP: A testing agency accredited according to NIST's National Voluntary <br />Laboratory Accreditation Program. <br />H. Manufacturer's Technical Representative Qualifications: An authorized representative of <br />manufacturer who is trained and approved by manufacturer to observe and inspect installation <br />of manufacturer's products that are similar in material, design, and extent to those indicated for <br />this Project. <br />Factory -Authorized Service Representative Qualifications: An authorized representative of <br />manufacturer who is trained and approved by manufacturer to inspect installation of <br />manufacturer's products that are similar in material, design, and extent to those indicated for this <br />Project. <br />J. Preconstruction Testing: Where testing agency is indicated to perform preconstruction testing <br />for compliance with specified requirements for performance and test methods, comply with the <br />following: <br />1. Contractor responsibilities include the following: <br />a. Provide test specimens representative of proposed products and construction. <br />b. Submit specimens in a timely manner with sufficient time for testing and analyzing <br />results to prevent delaying the Work. <br />c. Provide sizes and configurations of test assemblies, mockups, and laboratory <br />mockups to adequately demonstrate capability of products to comply with <br />performance requirements. <br />d. Build site -assembled test assemblies and mockups using installers who will <br />perform same tasks for Project. <br />e. Build laboratory mockups at testing facility using personnel, products, and <br />methods of construction indicated for the completed Work. <br />2. Testing Agency Responsibilities: Submit a certified written report of each test, <br />inspection, and similar quality -assurance service to Architect, with copy to Contractor. <br />Interpret tests and inspections and state in each report whether tested and inspected work <br />complies with or deviates from the Contract Documents. <br />K. Mockups: Before installing portions of the Work requiring mockups, build mockups for each <br />form of construction and finish required to comply with the following requirements, using <br />materials indicated for the completed Work: <br />1. Build mockups in location and of size indicated or, if not indicated, as directed by <br />Architect. <br />QUALITY REQUIREMENTS 01 40 00 - 6 <br />