Laserfiche WebLink
INDIAN RIVER COUNTY JULY 25, 2014 <br />INTERGENERATIONAL RECREATION CENTER 100% CONSTRUCTION DOCUMENTS <br />11. Comments or professional opinion on whether tested or inspected Work complies with <br />the Contract Document requirements. <br />12. Name and signature of laboratory inspector. <br />13. Recommendations on retesting and reinspecting. <br />B. Manufacturer's Technical Representative's Field Reports: Prepare written information <br />documenting manufacturer's technical representative's tests and inspections specified in other <br />Sections. Include the following: <br />1. Name, address, and telephone number of technical representative making report. <br />2. Statement on condition of substrates and their acceptability for installation of product. <br />3. Statement that products at Project site comply with requirements. <br />4. Summary of installation procedures being followed, whether they comply with <br />requirements and, if not, what corrective action was taken. <br />5. Results of operational and other tests and a statement of whether observed performance <br />complies with requirements. <br />6. Statement whether conditions, products, and installation will affect warranty. <br />7. Other required items indicated in individual Specification Sections. <br />C. Permits, Licenses, and Certificates: For Owner's records, submit copies of permits, licenses, <br />certifications, inspection reports, releases, jurisdictional settlements, notices, receipts for fee <br />payments, judgments, correspondence, records, and similar documents, established for <br />compliance with standards and regulations bearing on performance of the Work. <br />1.9 QUALITY ASSURANCE <br />A. General: Qualifications paragraphs in this article establish the minimum qualification levels <br />required; individual Specification Sections specify additional requirements. <br />B. Manufacturer Qualifications: A firm experienced in manufacturing products or systems similar <br />to those indicated for this Project and with a record of successful in-service performance, as <br />well as sufficient production capacity to produce required units. <br />C. Fabricator Qualifications: A firm experienced in producing products similar to those indicated <br />for this Project and with a record of successful in-service performance, as well as sufficient <br />production capacity to produce required units. <br />D. Installer Qualifications: A firm or individual experienced in installing, erecting, or assembling <br />work similar in material, design, and extent to that indicated for this Project, whose work has <br />resulted in construction with a record of successful in-service performance. <br />E. Professional Engineer Qualifications: A professional engineer who is legally qualified to <br />practice in jurisdiction where Project is located and who is experienced in providing <br />engineering services of the kind indicated. Engineering services are defined as those performed <br />for installations of the system, assembly, or product that are similar in material, design, and <br />extent to those indicated for this Project. <br />F. Specialists: Certain Specification Sections require that specific construction activities shall be <br />performed by entities who are recognized experts in those operations. Specialists shall satisfy <br />qualification requirements indicated and shall be engaged for the activities indicated. <br />QUALITY REQUIREMENTS 01 40 00 - 5 <br />