Laserfiche WebLink
INDIAN RIVER COUNTY JULY 25, 2014 <br />INTERGENERATIONAL RECREATION CENTER 100% CONSTRUCTION DOCUMENTS <br />SECTION 230517 - SLEEVES AND SLEEVE SEALS FOR HVAC PIPING <br />PART 1 - GENERAL <br />1.1 RELATED DOCUMENTS <br />A. Drawings and general provisions of the Contract, including General and Supplementary <br />Conditions and Division 01 Specification Sections, apply to this Section. <br />1.2 SUMMARY <br />A. Section Includes: <br />1. Sleeve -seal fittings. <br />1.3 ACTION SUBMITTALS <br />A. Product Data: For each type of product indicated. <br />PART 2 - PRODUCTS <br />2.1 SLEEVE -SEAL FITTINGS <br />A. Manufacturers: Subject to compliance with requirements: <br />B. Description: Manufactured plastic, sleeve -type, waterstop assembly made for imbedding in <br />concrete slab or wall. Unit has plastic or rubber waterstop collar with center opening to match <br />piping OD. <br />PART 3 - EXECUTION <br />3.1 SLEEVE INSTALLATION <br />A. Install sleeves for piping passing through penetrations in floors, partitions, roofs, and walls. <br />Install sleeves in concrete floors, concrete roof slabs, and concrete walls as new slabs and <br />walls are constructed. <br />1. Permanent sleeves are not required for holes in slabs formed by molded -PE or -PP <br />sleeves. <br />2. Cut sleeves to length for mounting flush with both surfaces. <br />a. Exception: Extend sleeves installed in floors of mechanical equipment areas or <br />other wet areas 2 inches above finished floor level. <br />SLEEVES AND SLEEVE SEALS FOR HVAC PIPING 230517 - 1 <br />