2014-200C - Laserfiche WebLink

Home Browse Search

INDIAN RIVER COUNTY JULY 25, 2014 INTERGENERATIONAL RECREATION CENTER 100% CONSTRUCTION DOCUMENTS 2.8 ALKYD PAINTS A. Interior Alkyd (Flat): MPI #49 (Gloss Level 1). B. Interior Alkyd (Eggshell): MPI #51 (Gloss Level 3). C. Interior Alkyd (Semigloss): MPI #47 (Gloss Level 5). D. Interior Alkyd (Gloss): MPI #48 (Gloss Level 6). 2.9 QUICK -DRYING ENAMELS A. Quick -Drying Enamel (Semigloss): MPI #81 (Gloss Level 5). B. Quick -Drying Enamel (High Gloss): MPI #96 (Gloss Level 7). 2.10 DRY FOG/FALL COATINGS A. Latex Dry Fog/Fall: MPI #118. B. Waterbome Dry Fall: MPI #133. C. Interior Alkyd Dry Fog/Fall: MPI #55. 2.11 FLOOR COATINGS A. Interior Concrete Floor Stain: MPI #58. B. Interior/Exterior Clear Concrete Floor Sealer (Water Based): MPI #99. C. Interior/Exterior Clear Concrete Floor Sealer (Solvent Based): MPI #104. 2.12 SOURCE QUALITY CONTROL A. Testing of Paint Materials: Owner reserves the right to invoke the following procedure: 1. Owner will engage the services of a qualified testing agency to sample paint materials. Contractor will be notified in advance and may be present when samples are taken. If paint materials have already been delivered to Project site, samples may be taken at Project site. Samples will be identified, sealed, and certified by testing agency. 2. Testing agency will perform tests for compliance with product requirements. 3. Owner may direct Contractor to stop applying coatings if test results show materials being used do not comply with product requirements. Contractor shall remove noncomplying paint materials from Project site, pay for testing, and repaint surfaces painted with rejected materials. Contractor will be required to remove rejected materials from previously painted surfaces if, on repainting with complying materials, the two paints are incompatible. INTERIOR PAINTING 09 91 23 - 6