2014-200A - Laserfiche WebLink

Home Browse Search

ADDENDUM NO. 3 11/5/2014 practicing independent of any business entity on the map and report. ❑ (g) Survey date (date of data acquisition.) ❑ (h) Revision date for any graphic revisions (when survey date does not change.) ❑ (1) Map and report statement "Survey map and report or the copies thereof are not valid without the signature and the original raised seal of a Florida licensed surveyor and mapper." ❑ (j) Insurance statement in Vs" high letters "The survey depicted here is not covered by professional liability insurance" if there is no professional liability insurance. ❑ (k) Additions or deletions to survey maps or reports by other than the signing party or parties is prohibited without written consent of the signing party or parties. ❑ (I) All computed data or plotted features shown on survey maps supported by accurate survey measurements unless clearly stated otherwise. ❑ (m) Bearings, distances, coordinates, and elevations shown on a survey map shall be substantiated by survey measurements unless clearly stated otherwise. ❑ (n) Bearing reference (well established and monumented Zine) ❑ (o) A designated "north arrow" ❑ (p) Stated scale or graphic scale ❑ (q) Abbreviations in legend or notes. ❑ (r) Special conditions and any necessary deviation from the standards noted upon the map or report. ❑ (s) Responsibility for all mapped features stated on the map or report ❑ (t) Map or report clearly states the individual primarily responsible for the map or report when mapped features have been integrated with others. (u) Map Accuracy. (1) Vertical Feature Accuracy: ❑ (a) Vertical Control: Field -measured control for elevation information shown upon survey maps or reports shall be based on a level loop or closure to a second benchmark. ❑ (b) Closure in feet must be accurate to a standard of plus or minus .05 ft. times the square root of the distance in miles. ❑ (c) All surveys and maps or reports with elevation data shall indicate the datum and a description of the benchmark(s) upon which the survey is based. ❑ (d) Minor elevation data may be obtained on an assumed datum provided the base elevation of the datum is obviously different than the established datum. (2) Horizontal Feature Accuracy: ❑ (a) Horizontal Control: All surveys and maps or reports expressing or displaying features in a publicly published coordinate system shall indicate the coordinate datum and a description of the control points upon which the survey is based. ❑ (b) Minor coordinate data may be obtained and used on an assumed datum provided the numerical basis of the datum is obviously different than a publicly published datum. ❑ (c) The accuracy of control survey data shall be verified by redundant measurements or traverse closures. All control measurements shall achieve the following closures: CommerciallHigh Risk Linear: 1 foot in 10,000 feet; Suburban: Linear: 1 foot in 7,500 feet; 01025-18 Technical Specifications F:\Public Works\ENGINEERING DIVISION PROJECTS\1135-S County Park Intergeneratiional Rec Facility\Admim\ADDENDUMS\Technical Specs (SITE) - Addendum No. 311-5-2014.doc