Laserfiche WebLink
ADDENDUM NO. 3 11/5/2014 <br />Rural: Linear: 1 foot in 5,000 feet; <br />❑ (d) When statistical procedures are used to calculate survey accuracies, the <br />maximum acceptable positional tolerance, based on the 95% confidence level, should <br />meet the same equivalent relative distance standards as set forth in 61G17- <br />6.003(3)(p)(2.)(c) F.A.C. <br />❑ (e) Intended Display Scale: All maps or reports of surveys produced and delivered <br />with digital coordinate files must contain a statement to the effect of: "This map is <br />intended to be displayed at a scale of 1/ or smaller". <br />61G17-6.004 Specific Survey, Map, and Report Requirements <br />(1) As-Built/Record Survey: <br />❑ (a) Obtained field measurements of vertical or horizontal dimensions of constructed <br />improvements so that the constructed facility can be delineated in such a way that <br />the location of the construction may be compared with the construction plans. <br />❑ (b) Clearly shows by symbols, notations, or delineations, those constructed <br />improvements located by the survey. <br />❑ (c) All maps prepared shall meet applicable minimum technical standards. <br />❑ (d) Vertical and horizontal accuracy of the measurements made shall be such that it <br />may be determined whether the improvements were constructed consistent with <br />planned locations. <br />+ + END OF SECTION + + <br />01025-19 Technical Specifications <br />F:\Public Works\ENGINEERING DIVISION PROJECTS \1135-S County Park Intergeneratiional Rec <br />Facility'Admim'ADDENDUMS\Technical Specs (SITE) -Addendum No. 311-5-2014.doc <br />