Laserfiche WebLink
ORDINANCE 2012-021 <br />f. Maximum lot coverage; building(s) and impervious surface area; <br />g. Minimum separation distances between buildings; <br />h. Minimum right-of-way widths (by road type); <br />i. Minimum open space per lot and by phase [Note: The minimum open space <br />for the entire project shall meet or exceed the requirements of section <br />915.18.] <br />j. Minimum preservation/conservation area per lot. <br />Note: more conceptual plan submittal requirements are listed -out in section 915.242-2 <br />(2) Notwithstanding other provisions in this chapter (915) and Chapter 971, specific land <br />use criteria listed in Chapter 971 may be waived (modified or not applied) where <br />such criteria would merely apply to the compatibility of uses within the P.D. project <br />area if approved by the county. Where specific land use criteria apply to the <br />relationship of a use(s) within a P.D. project and properties adjacent to the project <br />area, the specific land use criteria shall apply pursuant to the provisions of chapter <br />971. <br />(3) The conventional standards and criteria found in Chapter 911, Zoning, not covered in <br />section 915.15(1) shall apply unless otherwise specifically waived or modified by <br />other provisions of this chapter. <br />Section 915.16. Compatibility standards. <br />Compatibility with areas adjacent to P.D. project areas shall be ensured by project <br />compliance with the following requirements. <br />(1) A twenty -five-foot setback from buildings, driveways, roadways, and parking areas <br />to perimeter P.D. project area property lines shall be established and shown on all <br />P4)-. plans for residential PD projects, with the exception of TND and mixed use <br />rp oiects. <br />(A) The twenty -five-foot setback shall not be required along a P.D. project <br />perimeter where there is a an existing or planned commercial or industrial <br />use , mixed use, or TND project on the an adjacent property or where the <br />P.D. project perimeter is adjacent to property having a commercial or <br />industrial land use plan designation. In such cases, normal setback, buffer, <br />and landscape standards shall apply. <br />In addition, the twenty -five-foot setback shall not be required along the <br />boundaries of a the P_D_/PRDwhie where those boundaries are contiguous <br />to lands which are part of the same project. For these purposes, contiguous <br />lands shall be considered part of the same project if the contiguous lands and <br />Bold Underline: Additions to Ordinance 14 <br />StFfib": Deleted Text from Existing Ordinance <br />C:\Documents and Settings\tlister\Local Settings\Temporary Internet Files\Content.Outlook\QPA7-MTU8\2012-021 915 PD.doc <br />