2013-000 (2) - Laserfiche WebLink

Home Browse Search

personnel. (3) Provide a safety program for the project and conduct a safety meeting prior to commencing work. f) Any disputes which may arise in this connection between the Contractor and any subcontractor must be settled between the parties concerned. The Ownerwill not undertake nor be in any way responsible for the settlement of such disputes. GC 4 ENGINEER'S STATUS. a) The Engineer will provide observation of the Contractor's activities and progress of the work. The Engineer will make complete and thorough inspections of all construction,draft change orders,and verify and certify partial and/or final payments due to the Contractor. The Engineer may, during the life of the Contract issue additional instructions, by means of drawings, minor change orders or otherwise, necessary to illustrate changes in the work. b) The Engineer shall have authority to stop the work whenever such stoppage may be necessary to insure the proper execution of the Contract or to protect the public and/or property. He shall also have authority to reject all work and materials which do not conform to the Contract and to decide questions which arise in the execution of the work. C) The Engineer will make decisions in writing on all claims of the Contractor, and on all other matters relating to the execution and progress of the work or the interpretation of the Contract documents. All such decisions of the Engineer shall be final. GC 5 DESIGN, DRAWINGS AND SPECIFICATIONS. a) The Owner through the Engineer,or the Engineer as the Owner's representative, shall furnish plans and specifications which completely represent the requirements of the work as far as practical to be performed under the Documents and shall be true developments thereof. The Owner will be responsible for the adequacy and sufficiency of the plans and specifications. The Owner or Engineer will provide the Contractor with copies of all drawings and specifications, not to exceed four (4) complete sets, for the execution of the work. b) The specifications and the drawings accompanying them are intended to describe and provide for a finished piece of work; they are intended to be complementary and what is called for by either shall be as binding as if called for by both. The Contractor understands that the work shall be complete in every detail, notwithstanding every item necessarily involved is not particularly mentioned,and the Contractor shall be held to provide all labor and material necessary for the completion of the indicated work. C) The Contractor shall, immediately upon receipt of the drawings,check all drawings furnished and shall promptly notify Owner of any illegibility, errors, omission, defect or discrepancies discovered in such drawings and shall comment as appropriate upon construction feasibility and practicality. The Contractor shall perform work only in accordance with the permitted drawings and any subsequent revisions thereto. d) If the permitted drawings change the scope of the work, the Contractor shall notify the owner and Engineer within seven (7)days of receipt of the permitted drawings and such notification shall contain a written description of the change and its impact on the cost and schedule, if any. Failure to provide such notice within seven days shall be a complete waiver by the Contractor of all additional cost and time and Contractor shall perform the work at his expense and complete the work according to schedule and in no event shall Contractor recover delay or consequential damages. e) The Contractor shall keep at the work site one (1) copy of all permitted drawings and specifications kept current with all changes and modifications and shall at all times give the Owner, the Engineer and all trades performing at the project, access thereto. 29