Laserfiche WebLink
PUMP / LIFT STATION: <br /> Record Drawings shall show elevations for the top and bottom and diameter of wet <br /> well along with invert of effluent line. Record Drawings should also indicate the <br /> make, model number, horsepower, impeller and condition point of pumps selected <br /> and installed, shape of wet well, location of control panel, location of pump out <br /> connection, float level settings, any deviation from the plans, and serial number(s)of <br /> the pump(s). <br /> SURVEY CONTROL <br /> 1. Install/re-establish: It shall be the contractor's responsibility to hire a <br /> Professional Surveyor and Mapper as defined per Chapter 472, Florida <br /> Statutes, to replace any horizontal and vertical control shown on the <br /> engineering plans that was destroyed during construction. <br /> 2. New roadway alignment control points (survey baseline or controlling line and all <br /> points as indicated on the plans or control sheet) upon final roadway completion. <br /> Include all intersections and side streets. State plane coordinates and <br /> elevations for all control points. <br /> 3. If shown on plans or not: Any Public Land Corner or Governmental Survey <br /> Control point(s),vertical control (bench marks), property corners destroyed <br /> and/or disturbed during the scope of the project shall be properly re-established <br /> as per standards as set forth within Florida Statutes, Administrative code and <br /> Minimum Technical Standards for that type of survey. All said surveying <br /> mentioned above shall be performed under the direct supervision of a <br /> registered Professional Surveyor and Mapper in the state of Florida and <br /> certified accordingly. Said Governmental agency(s) shall be notified in writing of <br /> disturbance and re-establishments. <br /> RECORD/AS-BUILTS DRAWINGS FORMAT - SUBMITTAL <br /> A. ENGINEER will supply the CONTRACTOR with the electronic file of the <br /> approved construction plans for the input of the As-Built (record) information. <br /> B. CONTRACTOR shall deliver seven (7) certified sets of Record/As-Builts with <br /> Electronic Drawing files prepared in AutoCAD 2009 AND PDF format or in <br /> current version as agreed by the ENGINEER. <br /> C. CONTRACTOR's surveyor shall review, sign and seal As-Builts or Record <br /> drawing(s). Said drawing(s) shall clearly state type of survey, positional <br /> tolerances, adhere and be certified to by a registered Professional Surveyor and <br /> Mapper in the state of Florida, any standards set forth by Florida Statutes, <br /> Administrative code and Minimum Technical Standards for As-Built/Record <br /> surveys. <br /> 01025-5 Technical Specifications <br /> FAPublic Works\ENGINEER ING DIVISION PROJECTS\084513-Old Dixie Hwy Sidewalk(38th Ln-45th St)\Admim\bid <br /> documents\Master Contract Documents\Technical Specifications.doc <br />