Laserfiche WebLink
the landscape plans and specifications. If the MOT plan is other than the <br /> Department Standard Indices, the plan must be signed, sealed and dated <br /> by a Professional Engineer. <br /> 4. Overall project cost estimate, including maintenance of traffic, will be <br /> prepared -Submit two hard copies in 8%" x 11" format. <br /> The following additional data shall be utilized for development of the plans: <br /> 1. The roadway plans sheets will be drawn at a scale of 1" = 40' prepared on 11" x <br /> 17" sheets. <br /> 2. Plan sheets shall depict existing right-of-way, section lines, property lines, <br /> temporary construction easements, and centerline of construction. Horizontal <br /> control points with state plane coordinates for all PC's, PT's, curve radius, curve <br /> length and horizontal PI's shall be included on the Plan or summarized in an <br /> alignment table. <br /> 3. Utility adjustment sheets are not included in this scope of services and will be <br /> negotiated, if required, as a separate agreement at the completion of the design <br /> phase. <br /> 4. Match lines shall not be located within the limits of an intersection. <br /> 5. All quantities shall reference FDOT Pay Item Numbers. <br /> 6. All details shall reference FDOT Index Numbers. <br /> 7. All specifications shall reference to FDOT Specifications for Road and Bridge <br /> Construction. Any deviations are special specifications not included in FDOT <br /> Specifications are required in the Technical Specifications. <br /> 8. Initial, interim and Final Plan Submittal shall include the following: <br /> i. Three (3) Sets of Signed and Sealed Plans. <br /> ii. One (1) Opinion of Probable Construction Cost <br /> iii. One (1) CD with drawings in PDF format. <br /> The plans will be prepared based upon English units. The design will be conducted in <br /> MicroStation and Geopak. Final Design files will be provided to the COUNTY in autoCAD <br /> format. <br /> 2. Monument Signage: <br /> The Consultant will be provided a monument sign conceptual design template from the <br /> COUNTY adequate to understand intent. From this template the ENGINEER will prepare <br /> specific design documents indicating the style, size, materials,finishes, etc. necessary to <br /> construct the final approved sign. The Consultant will prepare a family of signs (up to 3) <br /> based upon the conceptual design provided. <br />