Laserfiche WebLink
Work performed prior to ENGINEER's review and accordance with the schedule of Shop <br /> approval of the pertinent submittal will be at the sole Drawings and Sample submittals acceptable to <br /> expense and responsibility of CONTRACTOR. ENGINEER. ENGINEER's review and <br /> approval will be only to determine if the items <br /> D. Submittal Procedures covered by the submittals will, after installation <br /> or incorporation in the Work, conform to the <br /> 1. Before submitting each Shop information given in the Contract Documents <br /> Drawing or Sample, CONTRACTOR shall have and be compatible with the design concept of <br /> determined and verified: the completed Project as a functioning whole as I <br /> indicated by the Contract Documents. <br /> a. all field measurements, quantities, <br /> dimensions, specified performance criteria, 2. ENGINEER's review and approval <br /> installation requirements, materials, catalog will not extend to means, methods, techniques, <br /> numbers, and similar information with sequences, or procedures of construction <br /> respect thereto; (except where a particular means, method, <br /> technique, sequence, or procedure of con- <br /> b. all materials with respect to intended struction is specifically and expressly called for <br /> use, fabrication, shipping, handling, storage, by the Contract Documents) or to safety <br /> assembly, and installation pertaining to the precautions or programs incident thereto. The <br /> performance of the Work; review and approval of a separate item as such <br /> will not indicate approval of the assembly in <br /> c. all information relative to means, which the item functions. <br /> methods, techniques, sequences, and <br /> procedures of construction and safety 3. ENGINEER's review and approval of <br /> precautions and programs incident thereto; Shop Drawings or Samples shall not relieve <br /> and CONTRACTOR from responsibility for any <br /> variation from the requirements of the Contract <br /> d. CONTRACTOR shall also have Documents unless CONTRACTOR has in <br /> reviewed and coordinated each Shop writing called ENGINEER's attention to each <br /> Drawing or Sample with other Shop such variation at the time of each submittal as <br /> Drawings and Samples and with the required by paragraph 6.17.D.3 and ENGI- <br /> requirements of the Work and the Contract NEER has given written approval of each such <br /> Documents. variation by specific written notation thereof <br /> incorporated in or accompanying the Shop <br /> 2. Each submittal shall bear a stamp or Drawing or Sample approval; nor will any ! <br /> specific written indication that CONTRACTOR approval by ENGINEER relieve CON- <br /> has satisfied CONTRACTOR's obligations TRACTOR from responsibility for complying <br /> under the Contract Documents with respect to with the requirements of paragraph 6.17.D.1. <br /> CONTRACTOR's review and approval of that <br /> submittal. F. Resubmittal Procedures <br /> 3. At the time of each submittal, CON- 1. CONTRACTOR shall make correc- ! <br /> TRACTOR shall give ENGINEER specific tions required by ENGINEER and shall return <br /> written notice of such variations, if any, that the the required number of corrected copies of <br /> Shop Drawing or Sample submitted may have Shop Drawings and submit as required new <br /> from the requirements of the Contract Samples for review and approval. CON- <br /> Documents, such notice to be in a written com- TRACTOR shall direct specific attention in <br /> munication separate from the submittal; and, in writing to revisions other than the corrections <br /> addition, shall cause a specific notation to be called for by ENGINEER on previous <br /> made on each Shop Drawing and Sample sub- submittals. <br /> miffed to ENGINEER for review and approval of <br /> each such variation. 6.18 Continuing the Work <br /> i <br /> E. ENGINEER's Review A. CONTRACTOR shall carry on the Work and <br /> adhere to the progress schedule during all disputes or ! <br /> 1. ENGINEER will timely review and disagreements with OWNER. No Work shall be <br /> approve Shop Drawings and Samples in delayed or postponed pending resolution of any <br /> 00700-General Conditions REV 5-10-13 <br /> 00700-25 <br /> l"Tublic Works\ENG INEE RING DIVISION PROJECTS\1123 43rd Ave Sidewalk Improvements 26th St to Airport Dr WestlAdmim\bid documentsWaster Contract Documents\00700- i <br /> General Conditions REV 5-10-13.doc <br /> I <br /> j <br /> I <br /> i <br />