Laserfiche WebLink
C. Mix lightweight concrete fill with water utilizing ratios, quantities, and methods recom- <br />mended by the manufacturer. <br />D. Slowly pour lightweight fill into repair area and screed off flush with surrounding exist- <br />ing fill. <br />E. Mechanical attachment of base sheet may begin after the new fill has set. <br />3.08 COUNTERFLASHING PREPARATION <br />A. Counterflashing to Remain: Neatly bend existing counterflashing up at walls as required <br />to completely remove existing base flashings and to install new base flashings. After in- <br />stallation of new base flashings, neatly bend counterflashing back in place using suffi- <br />cient care to prevent deformation to the finished counterflashing. <br />B. Provide finished openings as indicated. <br />C. Install veneer materials of same type, size and finish to match existing. Set units in full <br />beds of mortar to match adjacent joints in thickness. Tool joints to match. <br />D. Repair exterior finish to match adjacent surfaces. <br />3.09 CLEANING <br />A. Inspect the site daily and clean up debris and hazards at the end of each day. Adjacent <br />roads, drives and walkways shall remain in operation and free from construction materi- <br />als debris. <br />B. Clean adjacent structures of dust dirt and debris. Return adjacent areas to original condi- <br />tions to the satisfaction of the Owner. <br />END OF SECTION 07 0150 <br />Indian River County West WWTP <br />Roof Replacement 0701 50-4 Preparation for Reroofing <br />