Laserfiche WebLink
1.06 <br />C. Fabricate metal edge (where no gutter is present) and coping in accordance with <br />ANSUSPRI ES -1 requirements. <br />D. Workmanship shall be first-class in every respect. The sheet metal work shall be <br />assembled and secured in accordance with these specifications, the manufacturer's <br />requirements and referenced standards. <br />DELIVERY, STORAGE AND HANDLING <br />A. Delivery: Deliver materials in the manufacturer's original sealed and labeled containers <br />and in quantities required to allow continuity of application. <br />B. Storage: Store materials within areas designated or approved by the Owner. Ensure <br />materials remain dry, covered and not in contact with the ground. <br />C. Handling: Handle material in such manner as to preclude damage and contamination <br />with moisture or foreign matter. <br />1.07 PROJECT CONDITIONS <br />A. Environmental: Protect building and its components from the elements at all times <br />during the project. <br />B. Coordination and Scheduling: Coordinate all phases of work to allow continuity of work <br />without delays. <br />1.08 WARRANTY <br />A. Contractor to provide the pre -finished sheet metal manufacturer's thirty (30) year finish <br />warranty from the date of substantial completion <br />PART 2 PRODUCTS <br />2.01 PRE -FINISHED ALUMINUM <br />A. ASTM B209 Aluminum Alloy Sheet and Plate, alloy and temper 3003-H14, primed and <br />finished on one side with Kynar/Hylar based fluoropolymer coating of 1.0 mil total dry <br />film thickness, and on the reverse side, with a wash coat of 0.3 to 0.4 mil dry film <br />thickness. A strippable plastic film should protect the finish during fabrication and <br />installation. Manufacturer's standard color to be selected by Owner. <br />1. 050 inch (50 -mil) <br />a. Continuous Cleat <br />2. 040 inch (40 -mil) <br />a. <br />Slip Flashing <br />b. <br />Receiver Flashing <br />C. <br />Counterflashing <br />d. <br />Coping <br />e. <br />Fascia Cover <br />f. <br />Metal Edge <br />g. <br />Gutter <br />Indian River County West WWTP <br />Roof Replacement 07 62 00-2 Sheet Metal Flashing and Trim <br />