2020-116D-2 - Laserfiche WebLink

Home Browse Search

IRC-1838 Indian River County Main Library Roof Replacement 01 40 00-3 Quality Requirements B. Owner Responsibilities: Where quality-control services are indicated as Owner's respon- sibility, Owner will engage a qualified testing agency to perform these services. 1. Owner will furnish Contractor with names, addresses, and telephone numbers of testing agencies engaged and a description of the types of testing and inspecting they are engaged to perform. 2. Costs for retesting and reinspecting construction that replaces or is necessitated by work that failed to comply with the Contract Documents will be charged to Con- tractor. C. Contractor’s Responsibilities: 1. Repair and protection of work and materials are Contractor’s responsibility. 2. Should any work or materials not conform with requirements of the Specifications or become damaged during the progress of the work, such work or materials shall be removed and replaced, together with any work disarranged by such alterations, at any time before completion and acceptance of the project. All such work shall be done at the expense of the Contractor. 3. Contractor will coordinate documents with manufacturer and perform such testing, reporting, and communication incidental to provisions of the warranty procedures. D. Manufacturer's Field Services: During construction and until substantial completion, man- ufacturer’s representative shall perform quality assurance site visits every ten working days to ensure materials are being properly installed and as required to obtain the specified warranty. 1. The first site visit shall be performed within the first three (3) days of operations. 2. Coordinate all site visits with Engineer. Submit reports of findings within one week of inspection. Payment applications will be rejected until applicable reports are received. 3. Inspections to be performed by an employee of the selected manufacturer that is assigned full time to their technical services department. Sales personnel will not be acceptable for this function and may result in rejection of the work installed that does not fulfill this requirement. 4. Manufacturer’s final inspections shall be performed only with REI personnel in at- tendance. A minimum of seven days’ written notice is required. Any manufac- turer’s final inspection conducted without REI personnel in attendance will be re- peated at no additional cost to the Owner. 5. Any violation of this requirement will result in the removal of that manufacturer for a period of not less than one year from the Engineer’s accepted materials list. E. Retesting/Reinspecting: Regardless of whether original tests or inspections were Contrac- tor's responsibility, provide quality-control services, including retesting and reinspecting, for construction that revised or replaced Work that failed to comply with requirements es- tablished by the Contract Documents. F. Associated Services: Cooperate with agencies performing required tests, inspections, and similar quality-control services, and provide reasonable auxiliary services as requested. Notify agency sufficiently in advance of operations to permit assignment of personnel. Pro- vide the following: 1. Access to the Work. 2. Incidental labor and facilities necessary to facilitate tests and inspections. 3. Adequate quantities of representative samples of materials that require testing and inspecting. Assist agency in obtaining samples. 4. Facilities for storage and field-curing of test samples. 5. Preliminary design mix proposed for use for material mixes that require control by