2020-116D-2 - Laserfiche WebLink

Home Browse Search

IRC-1838 Indian River County Main Library Roof Replacement 01 40 00-2 Quality Requirements defects, which may later develop. Work of all trades under this contract shall be closely coordinated in such a manner as to obtain the best possible workmanship for the entire project. All components of the work shall be installed in accordance with the best practices of the particular trade. The Contractor is responsible to advise the Owner sufficiently in advance of operations to allow for assignment of personnel. C. Materials or methods described by words which, when applied, have a well known technical or trade meaning will be held to refer to such recognized standard. Standard specifications or manufacturer’s literature, when referenced, shall be of the latest revision or printing un- less otherwise stated, and are intended to establish the minimum requirements acceptable. D. All materials shall be new, all materials and workmanship shall be in every respect in ac- cordance with the best modern practice. E. When special makes or grades of material which are normally packaged by the supplier or manufacturer are specified or accepted, such materials shall be delivered to the site in original packages or containers with seals unbroken and labels intact and shall not be opened until inspected and approved by the Engineer/Owner. F. The Contractor’s Foreman or Superintendent to maintain one complete set of the contract documents and approved submittals on the job site. G. Contractor shall be responsible to correct deficiencies identified by Engineer/Owner and non-conforming work within 24 hours of receipt of notification, either verbally or written, and submit a plan of action for addressing the deficiencies and non-conforming work. Fur- ther tear-off or commencement of other work shall not occur until all deficiencies and non- conforming work are properly addressed. H. At any time during the construction and completion of work covered by these Specifica- tions, if the conduct of any workman of the various crafts be determined unsuitable or a nuisance to the Owner or Engineer, or if the workman be considered incompetent or detri- mental to the work, the Contractor shall order such party removed immediately from the grounds with the person not returning at any time during the course of work on the project. I. Specialists: Certain sections of the Specifications require that specific construction activi- ties shall be performed by entities who are recognized experts in those operations. Spe- cialists shall satisfy qualification requirements indicated and shall be engaged for the ac- tivities indicated. J. Testing Agency Qualifications: An agency with the experience and capability to conduct testing and inspecting indicated, as documented by ASTM E 548, and that specializes in types of tests and inspections to be performed. K. Fabricator Qualifications: A firm experienced in producing products similar to those indi- cated for this Project and with a record of successful in-service performance, as well as sufficient production capacity to produce required units. L. Factory-Authorized Service Representative Qualifications: An authorized representative of manufacturer who is trained and approved by manufacturer to inspect installation of manufacturer's products that are similar in material, design, and extent to those indicated for this Project. 1.06 QUALITY CONTROL A. The authorized representatives and agents of Owner shall be permitted to inspect all work, materials, payrolls, records of personnel, invoices of materials, and other relevant data and records.