Laserfiche WebLink
INDIAN RIVER COUNTY COURTHOUSE <br />METAL ROOFING REPLACEMENT PROJECT <br />JANUARY 15, 2021 <br />PAGE 2 <br />SECTION 092513 <br />ACRYLIC PLASTER FINISH <br />D. Installer's Qualifications: The contractor shall be qualified to perform the work specified by <br />reason of experience. Contractor shall have at least 5 years of experience in commercial <br />textured finish application, and shall have completed at least 3 projects of similar size and <br />complexity. Contractor shall provide proof before commencement of work that he/she will <br />maintain and supervise a qualified crew of applicators through the duration of the work. <br />When requested Contractor shall provide a list of the last three comparable jobs including <br />the name, location, and start and finish dates for the work. <br />E. Mock-ups: The contractor shall install a 4 ft. x 8 ft mock-up of the system for evaluation and <br />approval by the design professional, building owner, or owner's representative/quality <br />assurance agent. <br />F. Testing: Testing shall be conducted as directed by the design professional, building owner, <br />or owner's representative/quality assurance agent to verify soffit/ceiling assembly <br />performance and adhesion to prepared substrates. <br />1.04 SUBMITTALS <br />A. Procedure: In accord with Owner requests. <br />B. Certificates: Manufacturer's certification that materials conform to Specifications <br />requirements. <br />C. Product data: Manufacturer's written recommendations for mix proportions and application <br />for factory -prepared finish materials. <br />D. Samples: The Contractor shall submit to the owner/architect two samples of each finish, <br />texture and color to be used on the project. The same tools and techniques proposed for the <br />actual installatioun shall be used to prepare the samples. Samples shall be 24 in. square <br />panel to accurately represent each color and texture to be utilized on the project <br />1.05 PRODUCT HANDLING <br />A. Procedures: In accord with Owner requests. <br />B. Immediately remove from site all materials which have been delivered in broken, damaged, <br />or unlabeled condition. <br />C. Protect materials from dampness. <br />D. Store materials indoors, off floor. <br />E. Deliver products in original packaging, labeled with product identification, manufacturer and <br />batch number. <br />F. Store projects in a dry area with temperature maintained between 50 and 85 degrees F. <br />Protect from direct sunlight. Protect from freezing. Protect from extreme heat above 90 <br />degrees F. <br />1.06 WARRANTY <br />A. Provide manufacturer's standard limited warranty. <br />