11/09/2021 (3) - Laserfiche WebLink

Home Browse Search

BYERS !ndian River County Implementation ENGINEERING COMPANY .._...._. _ _ .._.. ■ Owned % values o Creating Equipment Location features (Fiber Termination Location) with following attributes. ■ Site Identification Name o Import Fiber Devices inti Traffic Cabinets and Equipment Locations (Buildings) with following attriButes. ■ Comments (Common Name) ■ Manufacture ■ Model (If available) ■ Fiber Mode ■ IP Address (If available)_ ■ Trunk Ports o Attachment of digital pictures for: ■ Conduit Access Points ■ Cabinets ■ Equipment Locations o Creating Building Footprints o Creating Racks and mounting fiber devices and attaching pictures. Step 4 —Build Splice Connectivity in NexusWOrx. Upon completion of splice verification by QC's vendor and providing data that aligns with Byers needs a NexusWorx data technician will utilize the field verified splice data and our ISP connectivity data to build fiber strand and/or port connectivity in NexusWorx. Byers will need to work with IRC to define a Fiber Path naming convention that will be utilized. 4. ASSUMPTIONS The following are the assumptions regarding each phase. Step 1— GIS Data Update — • This will be a cross compare to the initial migrated GIS database, and we'll upload into NexusWorx any new features in GIS, not in the initial data load or removed from the county's GIS as long as the removal appears logical. This is only for the Phase 3 area. • We expect the delta between these data sets is expected to be less than 5%. • Below are the rules utilized in the initial migration and the same applies for the update: o Fibers will be loaded only from County Fiber Optic Cable feature class since this contains all of the consortium fibers. o Fiber Optic Cable feature class contains Copper cables and Conduits which will be extracted and loaded into Copper Cable and Conduit Duct Bank features. o The County Handhole feature class contains, in addition to Handholes, Patch Panel, Traffic Cabinets, and Splice Closure locations. Only Handholes, Traffic Cabinets, and Splice Locations will be loaded with these features. o Fiber Termination or Building locations will be generated from Fiber Building feature class. o Byers will add new attributes to capture percentage ownership. o All data appears to geographically accurate so that no updates will be performed on these features. Fiber cables may be offset to the structures or conduit running line. Step 2 — OSP/ISP Field Inventory & NexusWorx Update • No Manholes exist or any underground structure is requiring mechanical pumping or ventilatior-. Copyright © 2019- Byers Engineering Company, Atlanta GA - All rights reserved 7 55