Laserfiche WebLink
SECTION 01340 <br />SUBMITTAL OF SHOP DRAWINGS <br />1.1 SCOPE <br />A. Submit shop drawings, product data and samples as required by or <br />inferred by the Drawings and Specifications. Submittals shall conform to <br />the requirements of Article 6.17 of the General Conditions, Section 00700, <br />and as described in this Section. <br />1.2 SHOP DRAWINGS <br />A. Shop drawings are original drawings, prepared by the CONTRACTOR, a <br />subcontractor, supplier, or distributor, which illustrate some portion of the <br />work; showing fabrication, layout, setting, or erection details. Shop <br />drawings are further defined in Article 6.17, Section 00700. <br />B. Shop drawings shall be prepared by a qualified detailer and shall be <br />identified by reference to sheet and detail numbers on the Contract <br />Drawings. <br />1.3 PRODUCT DATA <br />A. Product data are manufacturer's standard schematic drawings and <br />manufacturer's catalog sheets, brochures, diagrams, schedules, <br />performance charts, illustrations, and other standard descriptive data. <br />Product data are further defined in Article 6.17, Section 00700. <br />B. Modify standard drawings to delete information which is not applicable to <br />the project and supplement them to provide additional information <br />applicable to the project. <br />C. Clearly mark catalog sheets, brochures, etc., to identify pertinent <br />materials, products, or mcdels. <br />1.4 SAMPLES <br />Samples are physical examples 70 illustrate materials, equipment, or <br />workmanship and to establish standards by which work is to be evaluated. <br />Samples are further defined in A-ticle 6.17, Section 00700. <br />01340 - Submittal of Shop Drawings.doc <br />01340-1 <br />F:\Public Works\ENGINEERING DIVISION PROJECTSY638 6th Avenue US -1 to 21st Street Resurfacing (SCOP)\1-Admin\Bids\Bid <br />Documents\Master Contract Documents\01340 - Submittal of Shop Drawings.doc <br />