Laserfiche WebLink
101. <br />rolz t <br />SECTION 2224 HIGH -VELOCITY HURRICANE ZONES- CHAIN LINK FENCES <br />ATTENTION APPLICANT. For Fence used as a pool barrier the following apply: Maximum mesh size for chain <br />link fences shall be a 21/4 inch square (57 mm) unless the fence is provided with slats fastened at the top or <br />bottom which reduce the openings to no more than 13/4 inches (44 mm). FBC454.2.17.1.6 <br />TABLE 2224 CHAIN LINK FENCE MINIMUM REQUIREMENTS <br />For Sl: l inch = 25.4 mm <br />NOTES: <br />1. This table is applicable only to fences with unrestricted airflow. <br />2. Fabric. 12112 gouge minimum. <br />3. Tension bands: Use one less than the height of the fence in feet evenly spaced. <br />4. Fabric ties: Must be minimum the same gouge of the fabric. <br />5. Fabric tie spacing on the top rail: Five ties between posts, evenly spaced. <br />6. Fabric tie spacing on line posts: One less than height of the fence in feet, evenly spaced. <br />7. Either top rail or top tension wire shall be used. <br />8. Braces must be used at terminal posts if top tension wire is used instead of top rail. <br />9. Post spacing: 10 foot (3 m) on center maximum. <br />10. Posts shall be embedded to within 6 inches (152 mm) from the bottom of the foundation. <br />11. In order to follow the contour of the land, the bottom of the fence may clear the contour of the ground by up to 5 inches (127 mm) <br />without Increasing table values to the next higher limit. <br />CHAIN LINK FENCE DETAIL <br />NOT TO SCALE. <br />Rev. 01/.190min Lin Fence <br />Terminal Post <br />Line Post <br />Terminal Post Concrete <br />Line Post Concrete <br />Fence Height (ft) <br />Dimensions <br />Dimensions <br />Foundation Size <br />Foundation Size <br />(in Inches) <br />(o.d. x wall thickness) <br />(diameterx depth) <br />(diameterx depth) <br />(o.d. x wall thickness) <br />(in inches) <br />(in inches) <br />(in inches) <br />Upto4 <br />2 /8x0.042 <br />1 /8x0.047 <br />10x24 <br />8x24 <br />Over 4to5 <br />23/8x0.042 <br />1/8x0.055 <br />10x24 <br />8x24 <br />Over 5 to 6f <br />2 3/8 x 0.042 <br />1 '/8 x 0.065 <br />10 x 24 <br />8 x 24 <br />Over 6to8 <br />23/8x0.110 <br />23/8x0.095 <br />10x36 <br />10x36 <br />Over 8to10 <br />2/8x0.110 <br />23/8x0.130 <br />12x40 <br />10x40 <br />Over 10 to 12 <br />2/8x0.160 <br />2/8x0.120 1 <br />12x42 <br />12x42 <br />For Sl: l inch = 25.4 mm <br />NOTES: <br />1. This table is applicable only to fences with unrestricted airflow. <br />2. Fabric. 12112 gouge minimum. <br />3. Tension bands: Use one less than the height of the fence in feet evenly spaced. <br />4. Fabric ties: Must be minimum the same gouge of the fabric. <br />5. Fabric tie spacing on the top rail: Five ties between posts, evenly spaced. <br />6. Fabric tie spacing on line posts: One less than height of the fence in feet, evenly spaced. <br />7. Either top rail or top tension wire shall be used. <br />8. Braces must be used at terminal posts if top tension wire is used instead of top rail. <br />9. Post spacing: 10 foot (3 m) on center maximum. <br />10. Posts shall be embedded to within 6 inches (152 mm) from the bottom of the foundation. <br />11. In order to follow the contour of the land, the bottom of the fence may clear the contour of the ground by up to 5 inches (127 mm) <br />without Increasing table values to the next higher limit. <br />CHAIN LINK FENCE DETAIL <br />NOT TO SCALE. <br />Rev. 01/.190min Lin Fence <br />