1999-009 - Laserfiche WebLink

Home Browse Search

APPLICABE_F 04DCS: A. Standard Specifications for Road and Bridge Construction, Florida Department of Transportation {FDOT), latest revision. RFFERF—NCiy SPEL]EI-CATIONS: A. Any material specified by a reference to the number, symbol, or title of a specific standard, such as commercial standards, a Federal specification, a trade association standard, or ether similar standard shall comply with the rwitl reMenfc in fho latest e—sinn the— F n.=..end . c i r. �..,k 1 „�,.— and any A„�GsaumanL VI supplement thereto in effect on the date of the Invitation for Bids, except as limited to type, class, or grade or modified in such reference. B. The standards referred to, except as modified in the Specifications, shall have full force and effect as through printed in the Specifications, These standards are not furnished to Bidders for the reason that the Manufacturers and Trades involved are assumed to be familiar with their requirements. The Architect will furnish, upon request, information as to how copies of the Standards referred to may be obtained, C. It is the intention of the various Divisions of the Specifications and Sections thereto, to require that all materials be used in the manner intended by the manufacturer, and that is work be performed by the standaris adopted by appropriate trade associations. To this objective, the following requirements shall be accepted as though incorporated into each Division and Section unless specifically excepted by the Contract Documents: 1) Where a particular system; product, material or service is snenified. the applicable current standard specifications or recommendations of the manufacturer are thereby incorporated. zj Where a particular operation is required to work the materials specified, the applicable currant standard specifications of practice of the trade Association ASTM Standards, Federal Specifications, American Standards, Commercial Standards, and Simplified Practice Recommendations are hereby incorporated. D. Wherever in these Specifications, reference is made to a manufacturer's printed directions or specifications, for materials or workmanship, a copy of such directions or specifications shall be on file in the Contractor's Field Office in the form of iiterature, brochures or handbooks for each reference. A. Methods - Compaction tests (if required) shall be performed in accordance with AASHT0 T-180. B. Field Density Tests on samples of in-place material as follows: Non -Structural Fills - at Feast 95% of maximum dry density. TECHNICAL SPECIFICATIONS