Laserfiche WebLink
C-1 <br />40 <br />(UGC01090.FMT):aa <br />SECTION 61090 <br />iy <br />REFERENCE STANDARDS <br />PART 1 - GENERAL <br />1.01 REQUIREMENTS INCLUDED <br />Abbreviations and acronyms used in contract Documents to <br />identify reference standards. <br />1.02 QUALITY ASSURANCE <br />A. Application: When a standard is specified by <br />reference, comply with requirements and <br />recommendations stated in that standard, except <br />when requirements are modified by the contract <br />Documents, or applicable codes establish stricter <br />standards. <br />B. Publication Date: The publication in effect on the <br />date of issue of Contract Documents, except when a <br />specific publication date is specified. <br />1.03 ABBREVIATIONS, NAMES, AND ADDRESSES DR ORGANIZATIONS <br />A. obtain copies of reference standards direct from <br />publication source, when needed for proper <br />performance of work, or when required for submittal <br />by Contract Documents. <br />B. The following, as appropriate to project, is a list <br />of referenced standards and their mailing addresses <br />for requesting copies of standards: <br />AA Aluminum Association <br />818 Connecticut Avenue, NW <br />Washington, D.C. 20006 <br />AABC Associated Air Balance Council <br />1000 Vermont Avenue, NW <br />Washington, D.C. 20005 <br />AASHTO American Association of State <br />Highway and Transportation officials <br />444 North Capitol Street, NW <br />Washington, O.C. 20001 <br />01090-1 <br />