Laserfiche WebLink
40 <br />• <br />X -Sections & Vertical Control). <br />7. Existing parcels, tracts, and lot corner locations shown with front footage dimensions per plat <br />when platted (if construction project is along back of lots, then show back lot dimensions.). <br />8. Existing roadway edge of pavement or edge of dirt road <br />9. Existing visible utilities as located in field (water, sewer, telephone, electric, cable, TV, etc.). <br />Survey plans will be provided to Indian River Comity for disbursement to miscellaneous utility <br />providers to redline their utility locations. <br />10. Existing driveway widths and types. <br />11. Existing drainage pipe crossings and driveway culverts types, sizes & invert elevations. <br />(Modified: See Culverts) <br />12. Existing fences. <br />13. Existing trees and/or shrubbery. <br />14. All other non-movable items such as mailboxes flag poles, etc. <br />15. Profile of all waterways that have proposed pipe crossings. <br />16. Profile of all proposed road crossings (jack and bore) <br />INDIAN RIVER COUNTY GIS DEPARTMENT <br />GIS STANDARD REQUIREMENTS FOR CONSTRUCTION AND AS -BUILT UTILITY SURVEY <br />WORK <br />1. All as -built drawings shall state in 1 inch lettering "AS -BUILT RECORD SURVEY" or " AS -BUILT <br />RECORD DRAWING" located in the bottom right hand side of the drawing original and/or copies. <br />(Not applicable) <br />2. All as -built and construction surveys shall meet the minimum requirements of the Chapter 61G17 <br />Florida Administrative Code Pursuant to Section 472 of the Florida Statues. All surveys shall be based <br />on a minimum horizontal control "Class B", third order. <br />3. All state plane coordinates shall be based on die Florida State Plane Horizontal Data (East Zone); <br />Florida High Precision Geodetic Network (Super station) and NAD 83/1990 - final adjustment. <br />4. State mane rmrdin-a!p-S and 1....,_hn---l-- <br />,,,,���,��,�,�� shuwr: on lite survey siiait be physically tied to a minimum of <br />of two known state plane coordinate benchmarks that utilize number 3 above. State plane coordinate <br />shall be shown on survey at benchmarks used. <br />5. All incoming as -built and/or survey Auto Cad drawing files shall be received on a 3 ''/2" diskette or <br />CD-ROM and in state plane coordinates. (Note: Prior to submitting tiie 3 %" Auto Cad diskette, three <br />(3) copies of each survey shall be submitted for review and approval. After all approvals, a Mylar <br />Reproducible along with two (2) signed and scaled copies of each survey shall be submitted. <br />6. All as -built drawings and/or construction survey shall be tied to a minimum of one permanent <br />reference monuments (P.R.M.) every 1400 feet and tied to a minimum of two section comers or one <br />section comer and one-quarter corner whichever is closest to the project. (Modified: See Baseline <br />Stationing and Control). <br />7. All as -built and/or survey drawings shall be calculated in a Cogo package for future GIS information. <br />JADANAISPECIFIC WORK AVPHORIZATION.doc <br />