Laserfiche WebLink
40 <br />0 <br />SECTION 02401 <br />s <br />DRAINAGE PIPIT <br />1. GENERAL <br />A. The Contractor shall furnish and install drainage pipes of the size and type <br />and at the invert elevations shown on the Drawings. <br />2. MATERIALS <br />A. Corrugated Steel Pipe - Where shown on the Drawings as "CMP", the <br />drainage pipe and required coupling hands shall he corrugated galvanized <br />steel and shall conform to the requirements of Section 943 of the FDOT <br />Specifications. <br />B. _Corrugated Aluminum Pipe - Where shown on the Drawings as "Aluminum <br />CMP"". or "Alum. CMP", the drainage pipe and required coupling bands shall <br />he corrugated aluminum and shall conform to the requirements of Section <br />945 of the FDOT Specifications. <br />C. Concrete Pipe - Where shown on the Drawings as RCP, the drainage pipes <br />shall meet the requirements of ASTM C76-70 (Class 111) and Sections 941 and <br />942 of the FDOT Specifications, unless otherwise noted. <br />D. PVC PIPE - Where shown on the Drawings as PVC, the drainage pipe and <br />fittings shall be Sch.40, Polyvinyl Chloride, and shall conform to the <br />requirements of Section 948-4 of the FDOT Specifications, unless otherwise <br />noted. <br />E. Bituminous Pipe Coating - Where shown on the Drawings as Asphalt Coated, <br />metal pipe, "ACCMP",the pine and fittings shall be bituminous coated inside <br />and out in conformance with Section 943 of the FDo,r Specifications. <br />F. Filter Clot] t - Where required shall be Amoco Propex 4545, or equal, <br />approved by Engineer prior to ordering. <br />G. Mitered End Sections - Mitered end sections shall he constructed . in <br />accordance with the applicable D.O.T. Road Design Standard Index (No. 272, <br />273 or 274) called for on the Drawings. <br />H. Flared Ead Sections - Flared end sections shall be constructed in accordance <br />with the applicable D.D.T. Road Design Standard Index (No. 270) called for <br />on the Drawings. <br />02401-1 <br />