1999-177B - Laserfiche WebLink

Home Browse Search

• r 2.05 THRESHOLD, WEATHERSTRIP A. Thresholds _And Weatherstripri.ng shall be PEMKO, to match the types and sizes indicated on the Hardware Schedule or de- tailed on the drawings. B. Provide screws and anchors as required. C. Finish to be per Schedule. 2.06 PLACEMENT OF HARDWARE Various items shall have the following heights and locations, unless otherwise indicated (Heights are shown from finish floor to center line of item): A. Hinges. ...........Standard Placement S. Cylindrical. Lockset........ 3811 C. Closer per manufacturer template to give maximum degree of opening. All closers to be mounted on room side of door. D. Stops 1. Wali: on wail where knob or pull hits. 2. Floor: as per standard practice. 3. Chain Door: as per standard pracL'ice. 4. Over -Head: per manufacturer template to give maximum degree of opening. All Over -Head stops to be mounted on room side of door. PART IIT EXECUTION 3.01 KEYING A. All locks shall be construction -master keyed, grandmaster keyed, and master keyed at the factory. B. Submit keying schedule, based on the instructions and prior approval of the Owner's representative, for final approval before ordering locks. C. Delivery I. All locks are to be delivered to the job site with -out the permanent key. All locks are to be keyed to the .=:iirat iilc� Owixec' a master key, if required. 2. A representative of the Hardware Supplier, upon the completion of the project, shall check all locks for proper location, operation and keying as well as deacti- vate the construction -key operation and transfer all locks to a permanent key operation. 3. All permanent keys shall be properly identified and tag- ged with a code number and location and shall be turned over directly to the Owner's representative. i 08700-3