Laserfiche WebLink
r <br />• <br />5. Sand lightly between succeeding enamel, urethane or varnish <br />coats. <br />6. omit__first coat {primer) on metal surfaces which have been <br />' shop -primed and touch-up painted, unless otherwise speci- <br />fied. <br />r <br />7. Api2ly <br />rime coat to material which is required to be <br />painted <br />finished, and which has not been prime coated by <br />others. <br />S. AD01V each material at not less than the manufacturer's <br />recommended spreading rate, to provide a total dry film to <br />thickness of not less than 4.0 mils for entire coating <br />system of prime and finish coats for a three (3) coat work. <br />9. Provide a total—dry-film thickness of not less than 2.5 <br />mils for entire coating system of prime and finish coat for <br />two (2) coat work. <br />J. Completed Work: <br />1. Match s3pproved samples for color, texture and coverage. <br />Remove, refinish or repaint work not in compliance with <br />specified requirements. <br />TOUCHING UP AND CLEANING <br />Upon completion, all touching up as required shall be done and <br />paint removed from all surfaces which are not specified to receive <br />paint. <br />PAINTING SCHE ULE <br />The following paints specified shall be manufactured by Benjamin <br />Moore or Sherwin Williams as an approved, comparable product. Color <br />selection to be by the Owner, the Architect, or the Interior <br />Designer. See Finishes Schedule on the Plans. <br />A. Exterior Wood Frim, <br />Wood Siding, <br />Fascias, Soffits, Etc <br />B. Interior Drywall: <br />C. Galvanized Metal: <br />One (l) coat sealer primer on all <br />faces and edges. Two (2) coats <br />Benjamin Moore Fxtprior Acrylic Latex <br />paint on exposed surfaces. <br />Two (2) coats Benjamin Moore Regal <br />Wall Satin over base sealer coat. <br />Specialty Finishes may apply also. <br />One (l) coat Benjamin Moore Galvan- <br />ized Iron Primer. Two (2) costs <br />Benjamin Moore Meta -lactic Paint,. <br />D. Structural Steele One coat red oxide primer over shop <br />primer. Two coats over all field <br />welds. <br />NOTE: All galvanized metal to be washed with mineral spirits to <br />remove any oil. <br />09900-3 <br />