Laserfiche WebLink
40 <br />• <br />Should the results of 28 days test fall below the required strength, the fourth <br />specimen shall be tested at 42 days. The Architect will evaluate the findings <br />to determine whether further testing is required.. <br />If the results of 14 day test meet or exceed 28 day required strength, 28 <br />days test and storage shall be waived. Costs of Testing 42 -day molded <br />specimens shall be reimbursed to the Owner. <br />PART 2 -EXECUTION <br />I . Familiarity With Pertinent Codes and Standards: In procuring all items used in this <br />Work, itis the Contractor s responsibility to verify the detailed requirements of the <br />specifically named codes and standards and to verify that the items procured for use <br />in this Work meet or exceed the specified requirements. <br />2. Rejection of Non -complying Items: The Architect reserves the right to reject items <br />incorporated into the Work which fail to meet the specified minimum requirements. <br />The Architect further reserves the right, and without prejudice to other recourse the <br />Architect may take, to accept non -complying items and subject to an adjustment in <br />the Contract Amount as approved by the Architect and the Owner. <br />i • Applicable Standards listed in these Specifications include, but are not necessarily <br />limited to. standards promulgated by the following agencies and organizations: <br />A. AASHTO = American Association of State Highway and Transportation. <br />Officials, 341 National Press Building, Washington, D.C. 20004. <br />B. ACI = American Concrete Institute, Box 19150, Redford Station, Detroit, <br />Michigan 48219. <br />C. AISC = American Institute of steel Construction, Inc. 1221 Avenue of [he <br />Americas, New York, N.Y. 10020.. <br />D. ANSI = American National Standards Institute (successor USASI and <br />ASA) 1430 Broadway, New York, N.Y. 10018. <br />E. ASTM = American Society for Testing and Materials, 1916 Race Street, <br />Philadelphia, PA 19103. <br />F. AWS = American Welding Society, Inc., 2501 N. W. 7th Street, Miami, FL <br />33125. <br />G. AWWA = American Water Works Association, Inc. 6666 West Quincy <br />Avenue, Denver, CO 80235, <br />FI. CRSI = Concrete Reinforcing Steel Institute, 228 North LaSalle Street, <br />Chicago, IL 60610. <br />T. CS = Commercial Standard of NBS, U.S. Department of Commerce L <br />Government Printing office, Washington, D.C. 20402. <br />T. FGMA = Flat Glass Marketing Association, 3310 Harrison, Topeka, <br />Kansas 66611. <br />I <br />IE -2 bw <br />