Laserfiche WebLink
• <br />C771 <br />CI <br />f, <br />SECTION 2E — MISCELLANEOUS LANDSCAPE AMMENITIES <br />+ <br />I. Decorative Concrete Pavers <br />A. Interlocking }saving stones and turf block shall be manufactured by Paver <br />' Systems, Inc., or approved equivalent. Paver shall be 3 118" thick <br />B, Installation shall be per manufacturer's specifications. <br />+ C. Unsuitable, unstable, or unconsolidated subgrade material shall be <br />excavated. Sack fill with three incites (Y) of compacted, dense graded <br />aggregate. (Subgradc and coarse granual base shall be compacted to 98% <br />1 maximum density per AASHTO T-180), <br />D. Place bedding, course of sharp, washed concrete sand or limestone <br />screenings to a uniform depth of l Yx" leveled to the grade and profile <br />required. <br />I <br />E. Install pavers with joints of approximately 118". <br />" F. Where required, cut paving stones with an approved cutter to tit accurately, <br />neatly, and without damaged edges. <br />G. 'Damp with mechanical vibrator until uniformly level, true to grade and free <br />of movement. <br />H. Fill voids by sweeping; in clean, Cine sand. <br />2. Unless otherwise noted, all connectors for wood stairs, ramps, signage. dccking, <br />and other landscape architectural amenities shall be type 316 stainless steel. Type <br />304 will not be accepted as a substitute. Additionally, all assembly hardware <br />" (nuts, bolts, screws, washers, etc.) shall also be type 316 stainless steel.. <br />