2000-236 - Laserfiche WebLink

Home Browse Search

s 40 6.3 CONTRACTOR shall provide competent, suitable qualified personnel to survey and lay out the Work and perform construction as required by the Contract Documents. CONTRACTOR shall at all times maintain good discipline and order at the site. Except in connection with the safety or protection of persons or the Work or property at the site or adjacent thereto, and except as otherwise indicted in the Contract Documents, all Work at the site shall be performed during regular working hours, and CONTRACTOR will not permit overtime work or the performance of Work on Saturday, Sunday or any legal holiday without OWNER's written consent given alter prior written notice to ENGINEER. 6.A Unless otherwise specified in the General Requirements, CONTRACTOR shall furnish and assume full responsibility for all material, equipment, labor, transportation, construction equipment and machinery, tools, appliances, fuel power, light, heat, telephone, water sanitary faciIitics, temporary facilities and all other facilities and incidentals necessary for the furnishing, performance, testing, start-up and completion of the Work. 6.5 All materials and equipment shall be of good quality and new, except as otherwise provided in the Contract Documents. if required by ENGINEER, CONTRACTOR shall famish satisfactory evidence (including reports of required tests) as to the kind and quality of materials and equipment. All material and equipment shall be applied, installed, connected, erected, used, cleaned and conditioned in accordance with the instructions of the applicable Supplier except as otherwise provided in the Contract Documents: but no provision of any such instructions will be effective to assign to ENGINEER, or any of ENGINEER's consultants, agents or employees, any duty or authority to supervise or direct the furnishing or performance of the Work or any duty or authority to undertake responsibility contrary to the provisions of paragraph 9.15 or 9.16. Adjusting Progress Schedule; 6.6 CONTRACTOR shall submit to ENGINEER for acceptance (to the extent indicated in paragraph 2.1) adjustments in the progress schedule to reflect the impact thereon of new developments; these will conform generally to the progress then if effect and additionally will comply with any provisions of the General Requirements applicable thereto. Substitutes or "Or -Equal" Items 6.7.1. Whenever materials or equipment are specified or described in the Contract Documents by using the name of a proprietary item or the name of a particular supplier, the naming of the item is intended to establish the type, function and quality required and to establish a basis for bidding. Unless the name is followed by words indicating that no substitution is permitted, substitute materials or equipment may be reviewed by Engineer if sufficient information is supplied by CONTRACTOR to allow Engineer to evaluate the proposed substitution. The use of materials or equipment other than those named shall be considered a substitution, which will be considered only after a contract for the Work is awarded. 6.7.2. If CONTRACTOR wishes to furnish or use a substitute item of material or equipment, CONTRACTOR shall make written application to Engineer for review thereof, certifying that the proposed substitute will perform the functions and achieve the results called for by the Contract Documents, be similar and of equal substance to that specified and be suited to the same use as that specified. The application will state that the evaluation and review of the proposed substitute will not prejudice CONTRACTOR'S achievement of Substantial Completion on time, whether or not review of the substitute for use in the Work will require a change in any of the Contract Documents (or in the provisions of any other direct contract with OWNER for work on the Project) to adapt the design to the proposed substitute and whether or not incorporation or use of the substitute in connection with the Work is subject to payment of any license fee or royalty. All variations of the purposed substitute from that specified will be identified in the application and available maintenance, repair and replacement service will be indicated. The application will also contain an GENERAL. CONDITIONS ac - 11.