2024-289 - Laserfiche WebLink

Home Browse Search

Mr. Himanshu Mehta October 18,•2024 Page 2 • Each new well will be equipped with an 8 -inch dual extraction QED well cap. Wellheads that were removed from abandoned wells will be installed on the seven replacement wells and three new vertical wells. • Three new QED AP -4 plus pumps, fittings, and hardware will be installed in the three new vertical wells. Existing pumps that were removed from the abandoned wells will be installed in the seven replacement wells. • Vertical well spoils will be transported to the active work face by SCS -FS. Task Two: HDPE Vacuum Lateral, Air and Forcemain Piping Installation SCS -FS will provide labor equipment and materials to install new HDPE vacuum lateral (SDR -17), air (SDR - 9) and forcemain (SDR -11) piping based on the following scope of work description: • Install 280 feet of 6 -inch vacuum lateral, 2 -inch air and 3 -inch forcemain piping from well EW - 39 to replacement well EW -56R and tie into the existing piping at EW -55. • Install 360 feet of 6 -inch vacuum lateral, 2 -inch air and 3 -inch force main piping from well EW - 40 to well EW -42. • Install the 18 -inch valve that was removed at location ZV-21. Install 560 feet of 18 -inch vacuum lateral, 2 -inch air and 3 -inch force main piping from ZV-21 to the tie in location at SC - 5. Vacuum, air and forcemain risers will be installed at replacement wells EW -69, EW -70 and side.slope collectors SC -3 and SC -4. • Install the 24 -inch valve that was removed at location ZV-20. Install 160 feet of 24 -inch vacuum lateral, 2 -inch air and 3 -inch forcemain piping from valve ZV-20 to downslope of SC -1. The 24 -inch vacuum lateral will terminate with a blind flange for future lateral piping. A 24 - inch by 8 -inch tee will be installed prior to the blind flange. • Install 880 feet of 8 -inch vacuum lateral, 2 -inch air, and 3 -inch forcemain piping to side slope collectors SC -1, SC -2, replacement well EW -72 and new wells EW -2401, EW -2402 and EW - 2403. Clean fill will be backfilled around all piping. Trench spoils that cannot be backfilled will be transported to the active working face by SCS -FS. ASSUMPTIONS The -scope of work is based on the following assumptions: • At a minimum, SCS -FS will have site access and permission to work Monday through Saturday from*7:00 AM to 7:00 PM. • The scope of work is based on one drill rig mobilization and demobilization. If additional mobilizations are needed there will be an additional cost based on the fee schedule. • Scope of work does not include new include new wellheads. Additional wellheads will be charged based on the fee schedule. • • Piping installation quantities are approximate and may vary. • The work area will be accessible and free of obstructions or other work activities performed by others that could delay the installation process. • SCS -FS may limit or restrict access to any and all traffic adjacent to the work area as needed. • Any additional drug testing or personnel background requirements to work for this project - those costs need to be passed through. Also, consider the time it takes to perform these checks/tests. • Additional change orders may be needed if changes to the scope of work are made after the date of this proposal or if costs due to unforeseen circumstances. • Payment terms to SCS -FS will be NET 30 or less.