Laserfiche WebLink
A TRUE COPY <br />XII'. Network Connectivity Test CERTRYAN L. BUTLER, , LAST PAGE <br />RYAN L. B, CLERK <br />Description <br />The purpose of this test is to show network connectivity across the hop of MNI Radio system. <br />Instruction <br />1. Connect an Ethernet capable test set to an access port of the MNI Radio ETH1. <br />2. Connect a second Ethernet capable test set across a single "Hop" of radio to the next site MNI <br />Radio ETH1 <br />3. Configure the test equipment for Layer 2 testing <br />4. Test equipment should show "green" when reset. <br />5. Allow the test to run for a minimum of 30 seconds <br />6. Move the second Test set to the next "Hop" of MNI Radio <br />7. Continue testing by moving the test equipment around to the MNI Radio ETH1 in the network <br />and ensure that each site has connectivity back to the original. <br />Result <br />This test is deemed passing if the test equipment is able to connect from the "Near End" to the "Far End" <br />over the MNI Radio ETH1. <br />Page 29 of <br />