2005-170 - Laserfiche WebLink

Home Browse Search

• The ENGINEER will attend biweekly progress meetings, unless the progress meeting can effectively be attended by conference call . • The ENGINEER will respond to COUNTY and contractor Request for Information (RFI) to provide interpretation or clarification of proposed improvements . Repetitive RFI ' s will be undertaken as an additional service and the fee will be calculated at an hourly rate along with expenses , unless the RFI was not previously answered clearly . • The ENGINEER will review and approve contractor submitted shop drawings and material specification sheets . The shop drawing review allows for two submittals of each shop drawing . Review of submittals will be undertaken as an additional service and the fee will be calculated at an hourly rate along with expenses . • The ENGINEER will review as-built drawings provided by the Contractor ' s licensed surveyor. • The ENGINEER will provide the contractor a list of identified deficiencies based upon a final field review and as-built drawing evaluation . The ENGINEER will perform a final walk through to verify that identified deficiencies have been rectified . • At the request of the COUNTY, the ENGINEER will review Contractor proposed plan alternatives . This work will be undertaken as an additional service and the fee will be calculated at an hourly rate along with expenses . J . Certification The ENGINEER will provide certification to St. Johns River Water Management District and all other required Federal , State , and local permitting agencies based on As-Built drawings provided by the Contractor' s licensed surveyor and information provided by the COUNTY . SECTION IV - TIME FOR COMPLETION The time for completion of the 90% design drawings, permit applications, and Engineer' s Opinion of Probable Construction Cost for the four intersections shall be eight ( 8 ) months . Once permits are received, 100% design drawings shall be completed 90 days thereafter . 12