2006-310 - Laserfiche WebLink

Home Browse Search

ATTACHMENT A The following described engineering services are additional scope items not previously covered in the Phase II Plant Expansion Amendments 1 or 2. These services will be addressed in the final plant permitting and additional bidding services and covered under this amendment: Task 1 . 0 Preliminary Design (No Changes in this Amendment) Task 2. 0 Preparation of Contract Documents (Amendment 3 Additional Services) IRC has asked that CDM modify the design documents to allow for the contract flexibility by identifying items that may be considered an alternate bid items. Given the current costs for plants of this magnitude the expansion may need to be scaled back to limit capital outlay and remain in budget. CDM will identify the items to be part of an alternate bid item so they may be included if the project bids are with the budget constraints of the project. If the alternate bid items exceed the budget, then the contract will be awarded without the alternate item being included in the contract. The alternate bid items will include the following components of the project: ■ Skids Nos. 6, 7, and 8 and associated electrical gear ■ Reverse Osmosis Booster Pumps Nos. 6, 7, and 8 ■ Cartridge Filter Nos. 7 and 8 (possibly 6, if requested by IRC) ■ Degassifier No. 4 and Blower No . 4 ■ Transfer Pump No 5. ■ Hypochlorite Tanks Nos. 4 and 5 ■ One 1500kW Generator and Associated Fuel tank All other components including the building and site improvements will remain in the base bid . The base bid will be the basis of award of the contract. Removing the above items also allows IRC to upgrade the capacity as the demand increases. Task 3.0 Permitting Services (Amendment 3 Additional Services) This task provides for the preparation of necessary permit applications, meetings, and negotiation with regulatory agencies and preparation of responses to Requests for Additional Information (RAI) by IRC Planning and Zoning. CDM is preparing the final RAI for the site plan approval incorporating the requirements of the Planning and Zoning Commission and ratified by the Board . ■ FDEP requires a permit to construct plant process and site improvements. CDM will submit a letter of information regarding the possibility of building the plant to an intermediate step and not going to a full build-out condition. ■ CDM will require additional landscape architecture services for the type B buffer required by the major modification of the site plan . The original site plan was required to have a Type C buffer. The Planning and Zoning commission increased the buffer to be a minimum of a Type B. This additional effort is for the landscape architect to prepare A-3 mh2526.Eoc