4/1/1958 - Laserfiche WebLink

Home Browse Search

• 1 1 0 1 41 1 1 0 --t-di-tion shall be shown on the tentative plat. All elevations shall be from United States Coast and Geodetic Datum, mean sea level, of the waters opposite the lands proposed to be platted. Prior to final approval of any plat if any part of said lands borders upon the narrows of the Indian River and is below an elevation of 5 feet, then the land shall be filled to an elevation of 5 feet. On such lands other than those bordering upon the narrows of the Indian River, that is South of the South line of Section 7, Township 33, Range 40, and North of the North line of Section 17, Township 31, Range 39, the same shall be filled to a minimum elevation of 4-1/2 feet. If a finger type of development is proposed, then the open river end of each finger shall be bulkheaded to a minimum elevation of 5 feet with a sloped or stepped bulkhead as desired from the open river end inland to a minimum elevation of 31-2 feet at the inland end. Where the bulkhead is less than 5 feet in elevation, then the ground elevation shall have a slope of 4 to 1 upward to an elevation of 5 feet. In such finger type development, road rights of ways shall be of a minimum width of 60 feet and channels or canals separating each finger shall be of a minimum width of SO feet with bulkhead walls and 100 foot width without bulkhead walls. 5. If it is elected to construct sidewalks and /or curbs along each side of each street, they shall be constructed in accordance with the following specifications: (a) The concrete shall be 2000 lbs. concrete and/or as specified in the Florida State Road Department Specifications for concrete curbs and concrete sidewalks. The forms and the construction methods shall be as specified in the Florida State Road Specifi- cations. 6. Street name signs shall be placed at each street intersection within or abutting the subdivision. Such signs shall be of the type and placed in accordance with the standard specifications of the County which are as follows: (a) All streets and roadways shall be numbered on the plat in accordance with the County's planned numbering system. At each roadway or street intersection there shall be placed one steel street.identification sign naming and designating both intersecting streets, as directed by the County Engineer. Each sign shall be 601 by 24t1 with 3k" or 4" embossed lettering and border of baked enamel finish mounted on a painted steel channel post with double twisted bar bracket. Said street intersection.sign must have a white background and black lettering and border with the lettering and border reflectorized, or the white back- ground reflectorized. Aluminum street signs shall be erected in subdivisions on the east side of the Indian River. 7. Water Plants and Systems shall be in accordance with the standard specifications l , of the County as follows: (a) Each lot within the subdivision area shall be provided with a water pipe connection. The size of the primary connection to the County's existing system, the size of primary and lateral lines throughout the subdivision shall be sufficient to meet the County's standards and specifications as to circulation, pressure and fire protection. Where the County's plan contemplates the further extension of primary water distribution lines through the subdivision, then the subdivider shall place such lines of such size as is contemplated in the plan.