Laserfiche WebLink
CDM has also budgeted one meeting with IRC SWDD and one additional meeting with FDEP <br /> in addition to those previously authorized to discuss the geotechnical evaluation of Segment I <br /> and permit renewal submittal to FDEP. CDM will respond to one Request for Additional <br /> Information (RAI) by FDEP. <br /> CDM will request on SWDD ' s behalf that the tire processing operation permit be removed from <br /> the general permit in this renewal . This will relieve the County of their yearly escrow <br /> requirements for this operation. Placing the tire operation into the General Operating Permit is <br /> expected to be covered with a simple request in the larger permit renewal. This is the most <br /> economical way to make the transition since the permit modification fee is much greater than <br /> the yearly registration fee . No contingencies are specifically made in the budget if FDEP has an <br /> RAI for this item. <br /> SCHEDULE <br /> Task Completion Date <br /> 3 . 1 Class I Landfill Geotechnical Evaluation Within 20 days of NTP <br /> 3 . 2 Submit Class I Operations Permit Renewal Within 30 days of NTP <br /> TASK 4 . 0 - GENERAL TECHNICAL ASSISTANCE <br /> CDM will provide General Technical assistance to IRC SWDD staff on an as needed basis . <br /> SWDD staff are performing a number of the tasks required annually by the current FDEP <br /> Landfill permits . CDM will provide support as needed for the SWDD staff as they perform <br /> these tasks . <br /> Each task will be authorized and documented up to the budgeted amount for this task . <br /> The following schedule is anticipated for the work in this proposal . <br /> SCHEDULE <br /> Task Completion Date <br /> 1 . 0 Full Cost Accounting Report March 28, 2004 <br /> 2 . 0 Financial Assurance Report September 1 , 2004 <br /> Site Survey July 15, 2004 <br /> 3 . 0 Permit Renewal of Class I Landfill <br /> with Horizontal C& D Expansion May 15, 2004 <br /> 4 . 0 General Technical Assistance Through out the Year <br /> B-5 rb4520 .doc <br />