2009-219 - Laserfiche WebLink

Home Browse Search

CDM will incorporate specifications for the integration of the instrumentation and controls for the new Well No . 7 in the Contract Documents . Communications at the South County WTP rely on wireless telemetry; CDM will design the respective systems accordingly. TASK 5. 0 WELL CONSTRUCTION PERMITTING In order to construct the new Well No. 7, the County must file for a construction permit with FDEP and SJRWMD, in addition to the CUP modification (issued by SJRWMD) . Preparation of the CUP modification is addressed in Task 6 . 0 below . CDM will prepare and submit the " Specific Permit to Construct Potable Water System Components" (FDEP Form 62-555 .900(1 ) ) prior to bidding the project. Issuance of the permit by FDEP will allow the County to construct the well and conduct performance testing . Upon completion of the well construction and demonstration of performance testing by the Contractor, CDM will prepare and submit the / Certification of Construction Completion and Request for Clearance to Place Permitted PWS Components into Operation' (FDEP Form 62- 555. 900(9) ) . Approval of this form by FDEP will allow the County to place the new well into service, pending resolution of all related CUP permit items and issuance of the CUP modification. In addition to the FDEP permits described above, SJRWMD requires the applicant to complete the State of Florida Permit Application to Construct, Repair, Modify or Abandon a Well " form (SJRWMD Form 4013-3-1) and a subsequent well completion form. Completion and submittal of these two forms will be the responsibility of the successful bidder. Preparation of the SJRWMD forms is not included in this Scope of Services . It is assumed that the construction of the new well will require an Administrative Site Plan Approval from the County' s Planning Department. The budget for this task reflects the need for administrative approval, and not full scale site plan approval . TASK 6. 0 CONSUMPTIVE USE PERMIT MODIFICATION (ONLY IF NECESSARY) Subtask 6 . 1 Review of Existing MODFLOW/SEAWAT Models CDM will obtain, review and evaluate the groundwater models and model documentation for the MODFLOW and SEAWAT models of the County developed by PBS&J for Indian River County Utilities . CDM will prepare a letter request for County signature requesting this information from PBS&J if the County is not already in possession of the electronic modeling files . The purpose of the review will be for the CDM engineers/ hydrologists to become familiar and comfortable with the existing groundwater models for use in support of the SJRWMD CUP modification and final siting of the well . For the purposes of this scope of work, it is assumed that these existing models are sufficiently calibrated and acceptable to the SJRWMD for CUP impact analysis . If additional model calibration is required or Well No . 7 is not adequately represented in the model, additional services will be negotiated with the County under separate cover. Subtask 6 . 2 Preparation of Technical Memorandum CDM will prepare a brief technical memorandum (TM) describing the model modifications, use and results that supports the changes to the County' s CUP application. The draft will be submitted to the County for review and comment. CDM will incorporate comments from the County and will submit three copies of the TM and the model input and output files on A-3 j12355.doc