2007-259(a-b) - Laserfiche WebLink

Home Browse Search

Indian River County Emergency Operations Center Interior Punch List - Tuesday - 06/12/07 June 22, 2007 Page 3 Media Production Room 003 1 . Left of Door 003A drywall needs to be sanded and repainted, irregular areas. 2. North wall to the left of the electrical outlet dirt mark on the wall needs to be sanded and repainted. 3. West wall, the short wall off of Door 003A, outside corner, fingerprints need to be repainted. 4. North wall a little bit to the right of the westernmost electrical outlet fingerprints on the wall basically between the 2 electrical outlets need to be repainted . 5 . Door 003A hollow metal door frame needs to be touched-up with paint where it has been chipped in numerous areas. Also, metal frame for the view light needs to be repainted at the screw head locations and areas where paint has been chipped or peeling off. 6. Drywall to the left of door frame 003B needs to be re-sanded and repainted. Un-sufficient coats of paint and irregularity in the drywall. 7. Drywall around light switch to the left of Door 003B opening cut too large, needs to be patched and repaired. 8 . Borrowed light BL4 drywall underneath the hollow metal frame at the bottom left comer and to the left of the jamb needs to be sanded and repainted, drywall is irregular. 9. Electrical outlet below borrowed light 4, drywall is irregular, needs to be patched and repaired around electrical outlet cover. 10. Borrowed light BU drywall needs to be patched and repaired on the bottom left and right comers there are voids in the frame. Also, bottom edge of the hollow metal frame paint irregular need to be sanded and repainted that is also typical of borrowed light #4. 11 . South wall below the borrowed light BL2 marks in the drywall need to be patched and repaired. 12. South wall easternmost electrical outlet drywall needs to be patched and repaired, irregular drywall around the perimeter. 13. Carper tiles in numerous locations near the door jambs and in the corners carpet tile is buckled up not setting flush to the floor. All joints need be set flush, replace. 14. All screws in the borrowed lights heads need to be painted to match the frame color. 15. Ceiling grid is bent, that is the ceiling grid to the top right of Door 003A, the 4" & 5d' ceiling grid off the north wall and V full tile off the east wall. 16. Ceiling tile missing off the east wall . 17. Ceiling tile damaged that, 2nd full tile off the east wall and 5th' full tile off the north wall, comer is chipped. 18 . Ceiling grid off the southeast corner of the west wall marks on the grid need to be cleaned. 19. Ceiling grid the 7ih grid off of Door 003B , red marks on the grid need to be cleaned. 20. Door 003E does not have any locksets installed. Computer Room 004 1 . Transition between carpet and raised flooring needs to he looked at, area is not tight and secure, this is the vinyl finished raised floor. 2. No vinyl base or base installed at the perimeter of the access flooring. 3. Cable work is still being done in this room. Room has not been cleaned yet. 4. Walls need to be touched-up with paint in numerous locations of fingerprints and scuff marks. 5 . All access floor tiles need to be set flush and level . 6. All penetrations to the acoustical ceiling needs to be cut in a neat flashing and escutcheon put around the openings . Right now they are all cut very irregular. 7 . North wall towards the west end above the electrical panel, the ceiling grid is missing. 8. Ceiling grid above the electrical panel on the east wall , grid is cut due to the conduit coming out of the panel. This needs to be done in a clean and neat fashion. Not acceptable. 9. In this same area ceiling grid to the right of the electrical panel on the east wall needs to be repainted or replaced, glue on the grid. D O N A D I O & Associates, Architects, P.A.