|
B. CONTRACTOR shall comply with all applicable give ENGINEER prompt written notice if CONTRACTOR
<br /> Laws and Regulations relating to the safety of persons or believes that any significant changes in the Work or
<br /> property, or to the protection of persons or property from variations from the Contract Documents have been caused
<br /> damage, injury, or loss; and shall erect and maintain all thereby or are required as a result thereof If ENGINEER
<br /> necessary safeguards for such safety and protection. deteim nes that a change in the Contract Documents is
<br /> CONTRACTOR shall notify owners of adjacent property required because of the action taken by CONTRACTOR in
<br /> and of Underground Facilities and other utility owners when response to such an emergency, a Work Change Directive
<br /> prosecution of the Work may affect them, and shall or Change Order will be issued.
<br /> cooperate with them in the protection, removal, relocation,
<br /> and replacement of their property. All damage, injury, or 6. 17 Shop Drawings and Samples
<br /> loss to any property referred to in paragraph 6. 13 .A.2 or
<br /> 6. 13 .A.3 caused, directly or indirectly, in whole or in part, A. CONTRACTOR shall submit Shop Drawings to
<br /> by CONTRACTOR, any Subcontractor, Supplier, or any ENGINEER for review and approval in accordance with the
<br /> other individual or entity directly or indirectly employed by acceptable schedule of Shop Drawings and Sample
<br /> any of them to perform any of the Work, or anyone for submittals. All submittals will be identified as ENGINEER
<br /> whose acts any of them may be liable, shall be remedied by may require and in the number of copies specified in the
<br /> CONTRACTOR (except damage or loss attributable to the General Requirements. The data shown on the Shop
<br /> fault of Drawings or Specifications or to the acts or Drawings will be complete with respect to quantities,
<br /> omissions of OWNER or ENGINEER or ENGINEER's dimensions, specified performance and design criteria,
<br /> Consultant, or anyone employed by any of them, or anyone materials, and similar data to show ENGINEER the
<br /> for whose acts any of them may be liable, and not services, materials, and equipment CONTRACTOR
<br /> attributable, directly or indirectly, in whole or in part, to the proposes to provide and to enable ENGINEER to review
<br /> fault or negligence of CONTRACTOR or any the information for the limited purposes required by
<br /> Subcontractor, Supplier, or other individual or entity paragraph 6. 17.E.
<br /> directly or indirectly employed by any of them).
<br /> CONTRACTOR's duties and responsibilities for safety and B. CONTRACTOR shall also submit Samples to
<br /> for protection of the Work shall continue until such time as ENGINEER for review and approval in accordance with the
<br /> all the Work is completed and ENGINEER has issued a acceptable schedule of Shop Drawings and Sample
<br /> notice to OWNER and CONTRACTOR in accordance with submittals. Each Sample will be identified clearly as to
<br /> paragraph 14.07.13 that the Work is acceptable (except as material, Supplier, pertinent data such as catalog numbers,
<br /> otherwise expressly provided in connection with Substantial and the use for which intended and otherwise as ENGI-
<br /> Cornpletion). NEER may require to enable ENGINEER to review the
<br /> submittal for the limited purposes required by paragraph
<br /> 6. 14 Safety Representative 6. 17.E. The numbers of each Sample to be submitted will
<br /> be as specified in the Specifications.
<br /> A. CONTRACTOR shall designate a qualified and
<br /> experienced safety representative at the Site whose duties C. Where a Shop Drawing or Sample is required by
<br /> and responsibilities shall be the prevention of accidents and the Contract Documents or the schedule of Shop Drawings
<br /> the maintaining and supervising of safety precautions and and Sample submittals acceptable to ENGINEER as
<br /> programs. required by paragraph 2.07, any related Work performed
<br /> prior to ENGINEER's review and approval of the pertinent
<br /> 6. 15 Hazard Communication Programs submittal will be at the sole expense and responsibility of
<br /> CONTRACTOR.
<br /> A. CONTRACTOR shall be responsible for coordi-
<br /> nating any exchange of material safety data sheets or other D. Submittal Procedures
<br /> hazard communication information required to be made
<br /> available to or exchanged between or among employers at 1 . Before submitting each Shop Drawing or
<br /> the Site in accordance with Laws or Regulations. Sample, CONTRACTOR shall have determined and
<br /> verified:
<br /> 6. 16 Emergencies
<br /> a. all field measurements, quantities, dimen-
<br /> A. In emergencies affecting the safety or protection of sions, specified performance criteria, installation
<br /> persons or the Work or property at the Site or adjacent requirements, materials, catalog numbers, and
<br /> thereto, CONTRACTOR is obligated to act to prevent similar information with respect thereto;
<br /> threatened damage, injury, or loss. CONTRACTOR shall
<br /> 00700 - 25
<br />
|